Fabrication process of metal matrix composite with nano-size SiC particle produced by vortex method.
نویسندگان
چکیده
منابع مشابه
EFFECT OF NANO SiC ADDITIVE ON MCMB-SiC COMPOSITE FABRICATION VIA MOLTEN SILICON INFILTRATION
C-SiC composites with carbon-based mesocarbon microbeads (MCMB) preforms are new type of highpreformance and high-temperature structural materials for aerospace applications. In this study MCMB-SiC composites with high density (2.41 g.cm-3) and high bending strength (210 MPa,) was prepared by cold isostatic press of mixed mesophase carbon powder derived from mesophase pitch with different amoun...
متن کاملMicrostructure and Mechanical Properties of Mg-5Nb Metal-Metal Composite Reinforced with Nano SiC Ceramic Particles
In this work, a Mg-5Nb metal–metal composite was reinforced with nano SiC (SiCn) ceramic reinforcement of varying volume fractions, using the disintegrated melt deposition technique. The extruded Mg-5Nb-SiCn composites were characterized for their microstructure and mechanical properties. Based on the results obtained, it was observed that the volume fraction of nano-SiC reinforcement played an...
متن کاملimpact behavior of ceramic-metal armour by al2o3-nano sic nano composite
abstract : alumina (al 2 o 3 ) is one of the most practical ceramics used in making ceramic-metal armours. to improve the properties of alumina, some other materials are added to it. in this paper, sic material as nano powder is added to alumina, and four armour samples of this new ceramic with different volume fractions (v.f. ) including 0%, 5%, 10% and 15% of sic particles are made. then, the...
متن کاملIN-SITU FABRICATION PROCESS OF AL- TIC COMPOSITE BY SLAG
The new in situ method for AI-TiC composite fabrication has been carried out. In this method, fabrication of AI-TiC composite by simultaneous introduction of titanium oxide and carbon into aluminum melt was investigated.. Under the process conditions, titanium and carbon reaction results in titanium carbide whiskers. The salt containing keriolite (Na3AIF6), titanium oxide (TiO2) and graphite us...
متن کاملProperties of particle phases for metal-matrix-composite design
Successful metallurgical design of metal-matrix-composites relies on the knowledge of the intrinsic property profiles of the metal matrix and especially the compounds employed for particles, whiskers or fibres. In this work we compiled the key properties melting point, bulk modulus, shear modulus, Young׳s modulus, density, hardness, Poisson׳s ratio and structure/space group from the widespread ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1999
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.49.149