Fabrication of ZnO/Graphene Nanocomposite by Ultrasonic Homogenization
نویسندگان
چکیده
منابع مشابه
Ultrasonic Fabrication of Monodispersed Nano-Copper Oxide
A green environmental friendly process for preparing monodispersed cuprous oxide nanoparticles is reported. In this process, cuprous oxide is prepared using Cu(OH)42- as precursor and glucose as reducing agency in the presence of dispersant under ultrasonic radiation. Spherical, welldispersed Cu2O nanoparticles were obtained with the average size of 200 nm or 1.5 μm, respectively, with or witho...
متن کاملFabrication of Polymer Electronic Boards by Ultrasonic Embossing and Welding
A method has been developed allowing fabrication of electronic boards from flexible polymer film by ultrasonic embossing and welding within seconds. A commercially available ultrasonic welding machine and micro patterned tools from aluminum are employed first to generate conductor paths on a flexible polymer film, in a further step, surface mounted devices (SMDs) are assembled and fixed on the ...
متن کاملDesign and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملPreparation and Characterization of ZrO2/TiO2 Nanocomposite under Ultrasonic Irradiation by Sol-gel Route
TiO2/ZrO2 nanocomposite was obtained by the sonochemical technique. In this method, two separate gels containing zirconium and titanium were prepared and mixed together. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4. The precursor titanium tetra isopropoxide (TTIP) dissolved in isopropanol. Mixing of Titanium and Zirconium gels was resulted in a yellow TiO2/ZrO2 ...
متن کاملPreparation and Characterization of ZrO2/TiO2 Nanocomposite under Ultrasonic Irradiation by Sol-gel Route
TiO2/ZrO2 nanocomposite was obtained by the sonochemical technique. In this method, two separate gels containing zirconium and titanium were prepared and mixed together. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4. The precursor titanium tetra isopropoxide (TTIP) dissolved in isopropanol. Mixing of Titanium and Zirconium gels was resulted in a yellow TiO2/ZrO2 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Wisconsin Space Conference
سال: 2018
ISSN: 2374-8885,2374-8877
DOI: 10.17307/wsc.v1i1.214