Fabrication of Transparent Parts by Laser Sintering Process
نویسندگان
چکیده
منابع مشابه
In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering
Transparent polycrystalline spinel ceramic was fabricated without any sintering aids by spark plasma sintering method of a mixture of Al2O3 and MgO powders for only 10min soak at 1250°C. Densification, microstructure and optical transparency of spinel were examined. The spinel exhibits an in-line transmission of 55% for a visible-wavelength of 470nm and high hardness value of 2040 HV.
متن کاملFabrication of Dish-Shaped Micro Parts by Laser Indirect Shocking Compound Process
Compound process technology has been investigated for many years on a macro scale, but only a few studies can be found on a micro scale due to the difficulties in tool manufacturing, parts transporting and punch-die alignment. In this paper, a novel technology of combining the laser shock wave and soft punch was introduced to fabricate the dish-shaped micro-parts on copper to solve these diffic...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولSurface Characterization of Polycarbonate Parts from Selective Laser Sintering
Selective Laser Sintering Irem Y. Tumer David C. Thompson Graduate Research Asst. Graduate Research Asst. Richard H. Crawford Kristin L. Wood Assistant Professor Associate Professor Mechanical Engineering Department The University of Texas at Austin Abstract Surfaces of polycarbonate Selective Laser Sintering parts are investigated to determine the characteristics a ecting part quality. Surface...
متن کاملAdvanced trans-tibial socket fabrication using selective laser sintering.
There have been a variety of efforts demonstrating the use of solid freeform fabrication (SFF) for prosthetic socket fabrication though there has been little effort in leveraging the strengths of the technology. SFF encompasses a class of technologies that can create three dimensional objects directly from a geometric database without specific tooling or human intervention. A real strength of S...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 2009
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.75.1454