Fabrication of TiO2 nanotubes for bioapplications
نویسندگان
چکیده
منابع مشابه
Fabrication of UV/ TiO2 nanotubes / Pd system by electrochemical anodization for furfural photocatalytic degradation
The aim of this study was to degrade furfural by a new nanotube system. To degrade some organic pollutants as well as to reduce the amount of furfural which is a well-known pollutant in oil industry, the photocatalytic process along with ultraviolet (UV) irradiation may be employed. In this study, the UV/TiO2/Pd system in which the nanoparticles of palladium doped into the titanium dioxide was ...
متن کاملFabrication of Anti-Aging TiO2 Nanotubes on Biomedical Ti Alloys
The primary objective of this study was to fabricate a TiO2 nanotubular surface, which could maintain hydrophilicity over time (resist aging). In order to achieve non-aging hydrophilic surfaces, anodization and annealing conditions were optimized. This is the first study to show that anodization and annealing condition affect the stability of surface hydrophilicity. Our results indicate that ma...
متن کاملfabrication of uv/ tio2 nanotubes / pd system by electrochemical anodization for furfural photocatalytic degradation
the aim of this study was to degrade furfural by a new nanotube system. to degrade some organic pollutants as well as to reduce the amount of furfural which is a well-known pollutant in oil industry, the photocatalytic process along with ultraviolet (uv) irradiation may be employed. in this study, the uv/tio2/pd system in which the nanoparticles of palladium doped into the titanium dioxide was ...
متن کاملFabrication of Carbon Nanotubes
The most common method used to fabricate carbon nanotubes is electric-arc discharge. An electric arc is an electrical breakdown of a gas which produces an ongoing plasma discharge, similar to the instant spark, resulting from a current flowing through normally nonconductive material such as air. The arc occurs in the gas-filled space between two conductive electrodes (often made of carbon) and ...
متن کاملControlled fabrication of porous double-walled TiO2 nanotubes via ultraviolet-assisted anodization.
Double-walled TiO2 nanotubes with porous wall morphologies are fabricated by anodization under ultraviolet (UV) irradiation. TiO2 formed by anodization of Ti is activated to generate electrons and holes by UV and the anodization process is influenced by the photo-generated charges. As a consequence, morphologies of the fabricated TiO2 nanotubes can be adjusted by controlling the UV illumination...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materiali in tehnologije
سال: 2015
ISSN: 1580-2949,1580-3414
DOI: 10.17222/mit.2014.152