Fabrication of Surface Layer Enriched with Zinc on AlSi17 Aluminium Cast Alloy by Hot-Dip Galvanizing

Effect of the Surface Oxidation on the Hot-dip Zinc Galvanizing of Cast Iron Wpływ Powierzchniowego Utleniania Na Efekty Cynkowania Ogniowego Żeliwa

In presented work authors analyzed the high-temperature oxidation process from the point of view of its influence on effects obtained during cast iron hot-dip zinc coating. Research concerned the influence of the high-temperature oxidation, as a preliminary stage previous to coating with zinc on the change of surface layer structure as well as subsurface layer of cast iron with flake, vermicula...

Some Applications of Neural Networks for Condition Monitoring in Industrial Systems for Hot Dip Zinc Galvanizing

The paper describes the abilities of some particular neural network structures (NNS) to provide condition monitoring in a real industrial system, designated for hot dip zinc galvanizing. Condition assessment of a molten zinc bath furnace, and more specifically analysis and prediction of the technical condition in galvanizing kettle walls are also developed in this paper.

Exploring Carbide-Free Bainitic Structures for Hot Dip Galvanizing Products

REACTION KINETICS OF THE FORMATION OF INTERMETALLIC Fe – Zn DURING HOT - DIP GALVANIZING OF STEEL

P. Pokorny, J. Kolisko, L. Balik – Czech Technical University – Klokner Institute, Prague, Czech Republic P. Novak – Institute of Chemical Technology, Prague, Czech Republic This review article mainly describes the composition of intermetallic Fe Zn, i.e. zeta (ζ), delta (δ1k + δ1p), gamma1 (Γ1) and gamma (Γ) on galvanized steel during low temperature galvanization (t ~ 450 °C). It gives detail...

EFFECTS OF HOT ISOSTATIC PRESSING ON THE TENSILE PROPERTIES OF A356 CAST ALLOY

The influences of age hardening and HIP (Hot Isostatic Pressing) on the mechanical properties of A356 (Al 7Si 0.6 Mg) casting alloys were studied. Cast bars were homogenized, heated and maintained at a temperature of 540°C for a duration of 2 hours, followed by rapid cooling in a polymeric solution. The castings were age hardened at 180°C for a duration of 4 hours before being subjected to HIP ...