Fabrication of submicron alumina ceramics by pulse electric current sintering using M2+ (M=Mg, Ca, Ni)-doped alumina nanopowders

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Spark plasma sintering of alumina nanopowders produced by electrical explosion of wires

Alumina nanopowders produced by electrical explosion of wires were sintered using the spark plasma sintering technique. The results of XRD analysis show that the main phase in the compacted nanopowders is α-Al2O3. According to the SEM observations, the sintered alumina nanopowder consists of micron-sized faceted grains and nano-sized necked grains. The increase in sintering temperature resulted...

متن کامل

Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing

Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...

متن کامل

Controlled Synthesis of Alumina Nanopowders Using Supercritical Fluids for Ceramics Applications

Alumina is the most widely used oxide ceramic material. It exists in many metastable forms which lead upon severe thermal treatment towards the thermodynamically stable phase alpha. Sintering of alumina generally takes part in a minimum of two stages: i) phase transition(s) towards the stable phase alpha and ii) densification of this phase alpha. The former step(s), linked to transition phase(s...

متن کامل

Surface Contamination of Alumina Ceramics by Carbon

Article history: Received: 01.05.2016. Received in revised form: 25.07.2016. Accepted: 06.09.2016. This study presents the results of investigating the cause of contamination of aluminum oxide ceramics (Al2O3) in the form of brown colored stain. Contaminated ceramic surfaces were examined with the scanning electron microscope (SEM) equipped with the Energy Dispersive Spectrometer (EDS). The res...

متن کامل

Fabrication of nanomaterials using porous alumina templates

Nanofabrication by self-organization methods has attracted much attention owing to the fact that it enables mass production without the use of expensive lithographical tools, such as an electron beam exposure system. Porous alumina can be fabricated electrochemically through anodic oxidation of aluminum by means of such a self-organization method, yielding highly ordered arrays of nanoholes sev...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Ceramics International

سال: 2009

ISSN: 0272-8842

DOI: 10.1016/j.ceramint.2008.10.007