Fabrication of stoichiometric U3Si2 fuel pellets
نویسندگان
چکیده
منابع مشابه
بوزدایی از fuel oil deodorization of fuel oil
مطالعات و بررسی های انجام گرفته نشان می دهد ترکیبات بودار موجود در fuel oil عمدتا ترکیبات سولفوردار سخت مثل تیوفن، دی متیل بنزوتیوفن و ... بوده و روشهای بوزدایی همچون استخراج با حلالهای اسیدی و بازی ، رقیق کاری با گازولین ، ماسکینگ با بوتیل استات نتایج چندان مطلوبی در بوزدایی از آن نشان نمی دهند.همچنین روش جذب سطحی برای بوزدایی fuel oil تنها با استفاده از جاذب هایی همچون بنتونیت و توفیت...
15 صفحه اولEffect of Using Oxygen-Enriched Gas during Induration Process of Iron Ore Pellets Containing Solid Fuel
In this research, the effects of oxygen injection during the induration process were studied in order to improve the quality specifications and increase the rate of production of the iron oxide pellets. Several experiments were carried out in palletizing pilot plant in different conditions of oxygen injection. The results suggested that if only the extra oxygen was injected into the furnace in ...
متن کاملFission Gas Release Comparison for PWR Duplex Fuel Pellets
Current research has identified Duplex pellets as an effective strategy for decreasing the centerline temperature of the fuel. However, before this design can be widely utilized several areas, including fission gas release, need to be better characterized. Therefore, this paper seeks to ascertain the relative difference in fission gas release between a standard solid UO2 reference design and a ...
متن کاملMathematical Model For Energy Saving In Induration Of Iron Ore Pellets Containing Solid Fuel
Mathematical model for a pilot scale iron ore pellet induration furnace has been developed which considers the process of induration including the reactions of limestone, magnetite and coke. The differential equations of energy, mass and momentum are solved simultaneously. The profiles of temperature, pressure and concentration are obtained. Performing separate experiments on sub processes; dry...
متن کاملEFFECT OF FUSION REACTION PRODUCTS HEATING ON THE VOLUME IGNITION OF DT AND D3He FUEL PELLETS
Laser fusion simulations are carried out for DT and D- He pellets by using a hydrodynamic code including heating from all charged reaction products and neutrons. It is shown that the inclusion of the side reactions and heating from all reaction products in the fuel pellets have an appreciable effect on the plasma temperature, the ICF drive energy requirement, fusion gain and the ignition c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MethodsX
سال: 2019
ISSN: 2215-0161
DOI: 10.1016/j.mex.2019.05.016