Fabrication of Silicon Nitride Ceramics by Electrophoretic Deposition.
نویسندگان
چکیده
منابع مشابه
Plasma Deposition of Silicon Nitride
This paper reports on the preparation and characterization of thin films of silicon nitride deposited on heated silicon substrates from Si(CH, ),-NHS-H, mixtures activated at room temperature by an a-c. discharge at low frequency. The films were deposited at 800°C. Deposition rate as well as refractive index were measured and several parameters were systematically varied , including deposition ...
متن کاملOrthopedic applications of silicon nitride ceramics.
Silicon nitride (Si(3)N(4)) is a ceramic material developed for industrial applications that demand high strength and fracture resistance under extreme operating conditions. Recently, Si(3)N(4) has been used as an orthopedic biomaterial, to promote bone fusion in spinal surgery and to develop bearings that can improve the wear and longevity of prosthetic hip and knee joints. Si(3)N(4) has been ...
متن کاملElectrophoretic Deposition of Hydroxyapatite
The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...
متن کاملMicrostructure of Spark Plasma-Sintered Silicon Nitride Ceramics
The microstructure and phase composition of the high-content Al2O3-Y2O3-doped spark plasma-sintered silicon nitride were investigated. Fully dense silicon nitride ceramics with a typical α-Si3N4 equiaxed structure with average grain size from 200 to 530 nm, high elastic modulus of 288 GPa, and high hardness of 2038 HV were spark plasma sintered (SPSed) at 1550 °C. Silicon nitride with elongated...
متن کاملKinetic investigation of carbon nanotube deposition by DC electrophoretic technique
In this paper, kinetics of DC electrophoretic deposition EPD of carbon nanotubes CNTs is investigated. Carbon nanotubes suspended in pure ethanol with addition of magnesium nitrate was used as deposition media. The effect of main EPD parameters such as deposition time, applied voltage and the CNT concentration on deposit yield was investigated. The variation of current density vs. time and the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2000
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.47.1021