Fabrication of Silicon Carbide Porous Body by Powder Space Holder-Polymer Impregnation and Pyrolysis Method
نویسندگان
چکیده
منابع مشابه
Stiffness variation of porous titanium developed using space holder method
The excellent properties of Ti have resulted in its generalised use for bone implants. However, Ti is very stiff in comparison with human cortical bone, and this creates problems of bone weakening and loosening of the implant. This article discusses the mechanical properties (flexural and compressive strength, and stiffness) of porous Ti–6Al–4V specimens developed using the space holder method....
متن کاملPorous Silicon Carbide for MEMS
Metal assisted photochemical etching (MAPCE) of 4H Silicon Carbide (SiC) was utilized to generate locally defined porous areas on single crystalline substrates. Therefore, Platinum (Pt) was sputter deposited on 4H-SiC substrates and patterned with photolithography and lift off. Etching was performed by immersing the Pt coated samples into an etching solution containing sodium persulphate and hy...
متن کاملFabrication of porous silicon-based silicon-on-insulator photonic crystal by electrochemical etching method
We present a fast, novel method for building porous silicon-based silicon-on-insulator photonic crystals in which a periodic modulation of the refractive index is built by alternating different electrochemical etching currents. The morphology and reflectance spectra of the photonic crystals, prepared by the proposed method, are investigated. The scanning electron micrograph and atomic force mic...
متن کاملSynthesis of zirconium carbide nanoparticles by sol-gel method and determination of powder characteristics
In this study, zirconium carbide nanoparticles were synthesized by the sol-gel method in the alcoholic system. The sol was prepared in a three-component alkoxide-water-alcohol system based on the chemical sol-gel process under acidic conditions and at pH = 5. Zirconium n-propoxide, furfuryl alcohol were used as raw materials. After the hydrolysis process and formation of the gel, the initial po...
متن کاملAnalysis of bending strength of porous titanium processed by space holder method
Porous titanium specimens have been produced by means of the space holder method. Titanium grade 3 (TiCP3) has been used as material and ammonium bicarbonate as spacer. Process parameters (compaction pressure, metal grain size range and spacer volume) influence on porosity morphology and distribution and bending strength has been analysed. The results denote an important loss of strength when c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2008
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.74.988