Fabrication of PZT Piezoelectric Ceramic Sheets by Doctor Blade.
نویسندگان
چکیده
منابع مشابه
Fabrication of Flexible Piezoelectric PZT/Fabric Composite
Flexible piezoelectric PZT/fabric composite material is pliable and tough in nature which is in a lack of traditional PZT patches. It has great application prospect in improving the sensitivity of sensor/actuator made by piezoelectric materials especially when they are used for curved surfaces or complicated conditions. In this paper, glass fiber cloth was adopted as carrier to grow PZT piezoel...
متن کاملFabrication and Piezoelectric Properties of 1-3 Composite Sheets Consisting of Highly Oriented PZT Single Crystal Grains
Cube-shaped PZT single crystals with PZ/PT=55/45 composition were grown in a relatively uniform size distribution around 80μm by a PbO-flux method. The PZT grains obtained were mixed with liquid polyimide resin and rolled on a glass plate to fabricate 1-3-type composite sheet. This rolling process resulted in a high orientation of the PZT grains as the {h00} are parallel to the substrate plane....
متن کاملCOMPARISON OF MECHANICAL AND ELECTRICAL PROPERTIES OF PIEZOELECTRIC COMPOSITES PZT/ZnO AND PZT/Al FABRICATED BY POWDER METALLURGY
Lead zirconate titanate (PZT) as a piezoelectric ceramic has been used widely in the fields of electronics, biomedical engineering, mechatronics and thermoelectric. Although, the electrical properties of PZT ceramics is a major considerable, but the mechanical properties such as fracture strength and toughness should be improved for many applications. In this study, lead monoxide, zirconium ...
متن کاملEffects of microwave heating on dielectric and piezoelectric properties of PZT ceramic tapes
Commercial lead zirconate titanate (PZT) perovskite powders were used to fabricate ceramic tape and then sintered by microwave and conventional methods. Both dielectric and piezoelectric properties of PZT ceramic tapes were studied in terms of sintering process. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) show the PZT perovskite phase with smaller grain size and dens...
متن کاملWafer-scale fabrication of self-actuated piezoelectric nanoelectromechanical resonators based on lead zirconate titanate (PZT)
In this paper we report an unprecedented level of integration of self-actuated nanoelectromechanical system (NEMS) resonators based on a 150 nm thick lead zirconate titanate (PZT) thin film at the wafer-scale. A top-down approach combining ultraviolet (UV) lithography with other standard planar processing technologies allows us to achieve high-throughput manufacturing. Multilayer stack cantilev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2000
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.47.674