Fabrication of Powder-based Ceramic Micro-burners
نویسندگان
چکیده
منابع مشابه
Fully-Enclosed Ceramic Micro-burners Using Fugitive Phase and Powder-based Processing
Ceramic-based microchemical systems (μCSs) are more suitable for operation under harsh environments such as high temperature and corrosive reactants compared to the more conventional μCS materials such as silicon and polymers. With the recent renewed interests in chemical manufacturing and process intensification, simple, inexpensive, and reliable ceramic manufacturing technologies are needed. ...
متن کاملSolid Freeform Fabrication Based on Micro-Plasma Powder Deposition
This paper presents a solid freeform fabrication (SFF) technique based on micro-plasma powder deposition (MPPD). The relationship between the geometric features of the deposited layers and the welding parameters is investigated. The arc length is controlled through the monitoring of the arc voltage. The result of building parts with functionally graded components by the MPPD process is shown as...
متن کاملMICRO-EDM FOR MICRO-CHANNEL FABRICATION ON NONCONDUCTIVE ZrO2 CERAMIC
In this study, microelectro-discharge (micro-ED) milling of nonconductive ZrO2ceramicsis investigated using a Cu tool electrode in kerosene dielectric. An adhesive Cu foil is firmly attached on the workpiece to initiate the sparks. After the machining of Cu foil, an electrically conductive carbonic layer is formed on the ceramic workpiece disassociating the kerosene dielectric, which allows mic...
متن کاملFabrication of Biochips with Micro Fluidic Channels by Micro End-milling and Powder Blasting
For microfabrications of biochips with micro fluidic channels, a large number of microfabrication techniques based on silicon or glass-based Micro-Electro-Mechanical System (MEMS) technologies were proposed in the last decade. In recent years, for low cost and mass production, polymer-based microfabrication techniques by microinjection molding and micro hot embossing have been proposed. These t...
متن کاملRheology of Ceramic-powder-filled Polymer Melts
Ceramic powder (zirconia) was mixed with binder consisting polypropylene, paraffin and stearic acid in elastic extruder. Steady and oscillatory shear flow properties of these materials in the molten state were measured on a cone-plate rheometer; parallel superposed steady and oscillatory shear flow experiments were also carried out. Moreover, flow properties at high shear rates were measured on...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2016
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2016.08.038