Fabrication of Porous Alumina Sintered Bodies by a Gelate-Freezing Method
نویسندگان
چکیده
منابع مشابه
Effect of Internal Structure on Thermal Properties of Alumina/Aluminum Composites Fabricated by Gelate-Freezing and Partial-Sintering Process, Respectively
The purpose of the present work was to clarify the effects of parameters of porous ceramics on the characteristics of composites fabricated by high-pressure infiltration. Alumina with different porosity (15–70 vol%) and pore morphology was successfully fabricated by gelate-freezing and the partial-sintering, respectively. Alumina/aluminum composites were made by squeeze casting, the aluminum in...
متن کاملFabrication of a porous anodic alumina membrane
With the aim of developing a process for surface enlargement on an electrode for measuring brain activity attempts have been made to fabricate a porous anodic alumina membrane directly on the electrode. The porous membrane was intended to be used as scaffold for deposition of an electrically conducting polymer on the electrode surface. A silicon wafer with gold electrodes was the base onto whic...
متن کاملFabrication of nanomaterials using porous alumina templates
Nanofabrication by self-organization methods has attracted much attention owing to the fact that it enables mass production without the use of expensive lithographical tools, such as an electron beam exposure system. Porous alumina can be fabricated electrochemically through anodic oxidation of aluminum by means of such a self-organization method, yielding highly ordered arrays of nanoholes sev...
متن کاملControlled fabrication of patterned lateral porous alumina membranes.
Confined lateral alumina templates are fabricated with different pore sizes by changing the acid electrolyte and the anodization voltage. The control of the number of pore rows down to one dimension is also achieved, by controlling the thickness of the starting aluminum film as well as the anodization voltage. We observe that the mechanism of pore formation in the lateral regime is very similar...
متن کاملFabrication of Porous Anodic Alumina with Ultrasmall Nanopores
Anodization of Al foil under low voltages of 1-10 V was conducted to obtain porous anodic aluminas (PAAs) with ultrasmall nanopores. Regular nanopore arrays with pore diameter 6-10 nm were realized in four different electrolytes under 0-30°C according to the AFM, FESEM, TEM images and current evolution curves. It is found that the pore diameter and interpore distance, as well as the barrier lay...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2005
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.113.712