Fabrication of patterned thermoplastic microphases between composite plies by inkjet printing
نویسندگان
چکیده
منابع مشابه
Fabrication of arrays of polymer gradients using inkjet printing.
Arrays of 84 polymer gradients, fabricated on a single glass microscope slide, were generated by inkjet printing, allowing a combination of high-throughput and true combinatorial methods. The gradual change of composition within the polymer gradients, consisting of two different monomers and a cross-linker, was validated by XPS and fluorescence analysis. Cellular screening of the gradients allo...
متن کاملHuman microvasculature fabrication using thermal inkjet printing technology.
The current tissue engineering paradigm is that successfully engineered thick tissues must include vasculature. As biological approaches alone, such as VEGF, have fallen short of their promises, one may look for an engineering approach to build microvasculature. Layer-by-layer approaches for customized fabrication of cell/scaffold constructs have shown some potential in building complex 3D stru...
متن کاملFabrication of Capacitive Acoustic Resonators Combining 3D Printing and 2D Inkjet Printing Techniques
A capacitive acoustic resonator developed by combining three-dimensional (3D) printing and two-dimensional (2D) printed electronics technique is described. During this work, a patterned bottom structure with rigid backplate and cavity is fabricated directly by a 3D printing method, and then a direct write inkjet printing technique has been employed to print a silver conductive layer. A novel ap...
متن کاملInkjet printing of bioadhesives.
Over the past century, synthetic adhesives have largely displaced their natural counterparts in medical applications. However, rising concerns over the environmental and toxicological effects of the solvents, monomers, and additives used in synthetic adhesives have recently led the scientific community to seek natural substitutes. Marine mussel adhesive protein is a formaldehyde-free natural ad...
متن کاملFabrication of Bendable Circuits on a Polydimethylsiloxane (PDMS) Surface by Inkjet Printing Semi-Wrapped Structures
In this work, an effective method was developed to fabricate bendable circuits on a polydimethylsiloxane (PDMS) surface by inkjet printing semi-wrapped structures. It is demonstrated that the precured PDMS liquid film could influence the depositing morphology of coalesced silver precursor inkjet droplets. Accordingly, continuous and uniform lines with a semi-wrapped structure were fabricated on...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Composite Materials
سال: 2014
ISSN: 0021-9983,1530-793X
DOI: 10.1177/0021998314533715