Fabrication of organic light-emitting diode using molybdenum trioxide interlayer between electrode and organic interface
نویسندگان
چکیده
منابع مشابه
Optimization of organic light emitting diode structures
This paper was published in Proceedings of SPIE 5277 (2004) and is made available as an electronic reprint with permission of SPIE. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of...
متن کاملMicro-Cavity in Organic Light-Emitting Diode
The study on micro-cavity in organic light-emitting diode(OLED) demands understanding the theory of multi-layer films. It is because OLED is basically an optical device and its structure consists of organic or inorganic layers of sub-wavelength thickness with different refractive indices. When the electron and holes are injected through the electrodes, they combine in the emission layers emitti...
متن کاملField Emission Organic Light Emitting Diode
In recent years, the developments in the OLEDs have gradually reached very advantageous of existence. These advantageous characteristics include self-luminous, wide viewing angle and low power consumption, etc. which make OLEDs very useful for numerous display applications and lighting devices. To effectively improve the characteristics of an OLEDs, there are many ways to be adopted. Such as: (...
متن کاملEffect of Interlayer on White Phosphorescent Organic Light-emitting Devices
We demonstrated a novel white electrophosphorescent organic light emitting diodes (PHOLEDs), which structure was ITO/NPB (35 nm)/MCP (5 nm)/Firpic: MCP 10 wt% (15 nm)/ Ir (MDQ)2(acac): TPBI X wt% (2 nm)/Firpic:TPBI 10 wt% (10 nm)/TPBI (40 nm)/LiF (1 nm)/Al (100 nm). The luminescent properties were studied by inserting different doping concentration of the red emitting layer (Ir(MDQ)2(acac):TPBI...
متن کاملFabrication and Characterization of Organic Light Emitting Devices
By using Indium tin oxide (ITO) as anode material and NPB and Alq3 as hole transport layer(HTL) and electron transport layer(ETL) respectively, a Organic Light Emitting Device (OLED) with emitted wavelength of (525 ± 20) nm is produced. Aluminium (Al) is used as a cathode. The calculated emission energy is 2.37 ± 0.12 eV compared to theoretically 2.8 eV from the band gap in Alq3. This shifting ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2018
ISSN: 0250-4707,0973-7669
DOI: 10.1007/s12034-018-1606-2