Fabrication of nanocrystal memories by ultra low energy ion implantation

Doping of carbon nanotubes using low energy ion implantation.

Carbon nanotubes (CNTs) were implanted with thermally decomposed oxygen (O2+) and nitrogen (N2+) ions at an acceleration voltage of 20 V. With a low dose of oxygen ions, the CNT-FET exhibited p-type behaviors with substantial changes in threshold voltage and in the slope of the source-drain current (l(sd)). However, at high dosages, the device exhibited metallic behaviors. After nitrogen doping...

Nanocrystal formation in hexagonal SiC after Ge+ ion implantation.

High-resolution and analytical electron microscopy techniques are used to characterize Ge-implanted hexagonal SiC. After annealing the implanted samples at 1200 degrees C, Ge is found to be located preferentially on interstitial sites. After annealing at 1600 degrees C, small nanocrystals of strained cubic and hexagonal (or faulted cubic) Ge and Ge Si form. Occasionally, hexagonal (or faulted c...

LOW-ENERGY-ION ENHANCED DIFFUSION AT THE SURFACE OF METALS

Radiation enhanced diffusion at the surface of metals has been observed and studied for low-energy nitrogen ions at the surface of copper. The displacement of the target atoms during irradiation creates vacancies and other defects near the surface, thus enhancing the diffusion of implanted materials toward the surface and also into the solid. The mechanism has been studied here by a specia...

Ultra-Low Voltage Nano-Scale Memories

In undergoing this life, many people always try to do and get the best. New knowledge, experience, lesson, and everything that can improve the life will be done. However, many people sometimes feel confused to get those things. Feeling the limited of experience and sources to be better is one of the lacks to own. However, there is a very simple thing that can be done. This is what your teacher ...

Nitridation of GaAs Surface by Low Energy Ion Implantation with In Situ Control of Chemical Composition