Fabrication of Multifunctional Nano Gelatin/Zinc Oxide Composite Fibers
نویسندگان
چکیده
منابع مشابه
Ultrasonic Fabrication of Monodispersed Nano-Copper Oxide
A green environmental friendly process for preparing monodispersed cuprous oxide nanoparticles is reported. In this process, cuprous oxide is prepared using Cu(OH)42- as precursor and glucose as reducing agency in the presence of dispersant under ultrasonic radiation. Spherical, welldispersed Cu2O nanoparticles were obtained with the average size of 200 nm or 1.5 μm, respectively, with or witho...
متن کاملFacile fabrication of light, flexible and multifunctional graphene fibers.
Macroscopic graphene fibers with strength comparable to carbon nanotube yarns have been fabricated with a facile dimensionally-confined hydrothermal strategy from low-cost, aqueous graphite oxide suspensions, which is shapable, weavable, and has a density of less than 1/7 conventional carbon fibers. In combination with the easy in situ and post-synthesis functionalization, the highly flexible g...
متن کاملFabrication of PGS/CaTiO3 Nano-Composite for Biomedical Application
Biodegradable elastomeric materials are gaining extensive attention in the field of soft tissue engineering. Poly (glycerol sebacate) (PGS) is a novel biocompatible elastomer in this scope. However this polymer has poor mechanical properties especially when the molar ratio of glycerol is higher than sebacic acid. Calcium Titanate (CaTiO3) is a biocompatible ceramic with some degr...
متن کاملFabrication of CH3NH3PbI3/PVP Composite Fibers via Electrospinning and Deposition
In our study, one-dimensional PbI₂/polyvinylpyrrolidone (PVP) composition fibers have been prepared by using PbI₂ and PVP as precursors dissolved in N,N-dimethylformamide via a electrospinning process. Dipping the fibers into CH₃NH₃I solution changed its color, indicating the formation of CH₃NH₃PbI₃, to obtain CH₃NH₃PbI₃/PVP composite fibers. The structure, morphology and composition of the all...
متن کاملFabrication of one-dimensional Ag/multiwalled carbon nanotube nano-composite
Composite made of multiwalled carbon nanotubes coated with silver was fabricated by an electroless deposition process. The thickness of silver layer is about 40 to 60 nm, characterized as nano-crystalline with (111) crystal orientation along the nanotube's axial direction. The characterization of silver/carbon nanotube [Ag/CNT] nanowire has shown the large current carrying capability, and the e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Autex Research Journal
سال: 2020
ISSN: 2300-0929
DOI: 10.2478/aut-2020-0046