Fabrication of Multi-Phases Composite Mg-Ni Alloys by High Current Pulsed Electron Beam
نویسندگان
چکیده
منابع مشابه
Fabrication of high-density nanostructures by electron beam lithography*
We demonstrate a fabrication method to define high-density, uniform nanostructures by electron beam lithography at conventional beam voltages ~,40 kV!. Here we optimize the exposure and development conditions needed to generate such nanostructure arrays using polymethylmethacrylate as positive resist and isopropyl alcohol as a developer. Arrays of 12 nm dots with 25 nm period and 20 nm lines wi...
متن کاملOptimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys
Electron beam welding has shown a remarkable job in the space industry for welding of components. It is performed under a vacuum environment that eliminates foreign matter such as hydrogen, oxygen, and other gases. Joining of similar and dissimilar materials is the main advantage of electron beam welding with high depth to width ratio as well as sharp focus at the point where parts are to be we...
متن کاملPulsed Electron-Beam Heating
A pulsed, 20 kv electron beam is focussed upon a vapor-deposited thermocouple, and the resulting temperature vs. time response is studied. The experimental data show much scatter, but are consistent with the theoretical prediction that the characteristic thermal response time T is proportional to d , where d is the beam diameter at the thermocouple. From these data, for the soft-glass substrate...
متن کاملA High Current, High Gradient, Laser Excited, Pulsed Electron Gun
This paper describes a pulsed electron gun that can be used as an FEL, as an injector for electron linear accelerators or for rf power generation. It comprises a 1 to 5 MeV, 1 to 2 ns pulsed power supply feeding a single diode, photoexcited acceleration gap. Beam quality of a ~ 1nC charge in ~ 1 GV/m field was studied. Computations of the beam parameters as a function of electrode configuration...
متن کاملFabrication of TiC particulate reinforced Ni-50Fe super alloy matrix composite powder by mechanical alloying
Mechanical alloying is a powder metallurgy processing technique involving cold welding, fracturing, and rewelding of powder particles in a high-energy ball mill. In this work, NiFe-TiC composite powders were prepared by mechanical alloying process using planetary high-energy ball mill. The effect of TiC addition by weight percent on the NiFe solid solution formation, grain size, lattice paramet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2012
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.12.638