Fabrication of Metal Matrix Composites under Intensive Shearing
نویسندگان
چکیده
منابع مشابه
Cure Cycle Design for Thermosetting-Matrix Composites Fabrication under Uncertainty
Design of the optimal cure temperature cycle is imperative for low-cost of manufacturing thermosetting-matrix composites. Uncertainties exist in several material and process parameters, which lead to variability in the process performance and product quality. This paper addresses the problem of determining the optimal cure temperature cycles under uncertainty. A stochastic model is developed, i...
متن کاملBasics of Metal Matrix Composites
Metal composite materials have found application in many areas of daily life for quite some time. Often it is not realized that the application makes use of composite materials. These materials are produced in situ from the conventional production and processing of metals. Here, the Dalmatian sword with its meander structure, which results from welding two types of steel by repeated forging, ca...
متن کاملBi-continuous metal matrix composites
Bi-continuous alumina/aluminium composites were made by infiltrating an alumina preform which had the structure of a reticulated ceramic foam. The low density preforms were prepared from a polyurethane suspension of alumina powder which was pyrolysed and sintered after foaming. Higher density preforms consisted of ceramic foams with open cells. All these preforms were infiltrated with 6061 alum...
متن کاملTribocorrosion in Metal Matrix Composites
One of the biggest motivations behind the development of the metal matrix composites (MMCs) is the improvement of the mechanical wear resistance of the unreinforced metallic matrix material mainly by the load-bearing effect of the hard reinforcement phases. However, in a large number of applications, MMCs are also required to operate in intimate contact with aqueous environments, which may lead...
متن کاملFabrication of Ti/SiCf metal matrix composites by vacuum plasma spraying
TiISiC, MMC monotapes have been successfully fabricated by vacuum plasma spraying. The as-sprayed MMC monotapes have a uniform fibre distribution, dense matrix and no fibre-matrix interfacial reaction. The effects of processing parameters such as H, flow rate, plasma current, chamber pressure and spray distance on the monotape temperature, porosity and fibre infiltration have been evaluated qua...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Solid State Phenomena
سال: 2008
ISSN: 1662-9779
DOI: 10.4028/www.scientific.net/ssp.141-143.373