Fabrication of Lanthanum Strontium Manganite Ceramics via Agar Gel Casting and Solid State Sintering
نویسندگان
چکیده
منابع مشابه
Fabrication and Characterization of Porous MgAl2O4 Ceramics via a Novel Aqueous Gel-Casting Process
A novel and aqueous gel-casting process has been successfully developed to fabricate porous MgAl₂O₄ ceramics by using hydratable alumina and MgO powders as raw materials and deionized water as hydration agent. The effects of different amounts of deionized water on the hydration properties, apparent porosity, bulk density, microstructure, pore size distribution and compressive strength of the sa...
متن کاملSintering Behavior of Porous Nanostructured Sr-Doped Lanthanum Manganite as SOFC Cathode Material
The fuel cells are distinguished as generating of green allocable energy and are electrochemical devices of low environmental impact. Porous nanocrystalline strontium-doped lanthanum manganite La0.8Sr0.2MnO3 (LSM) cathode materials were prepared by mechanochemical route in various grinding times. Carbon black was employed to produce pores. The formation of LSM single phase was studied by X-ray ...
متن کاملMagnetic transitions and electrical transport in lanthanum strontium manganite: Effects of substitutions and high pressure
The observation of a substitution-induced ferromagnetic order ~Tc5200 K! is reported in antiferromagnetic La0.9Sr0.1MnO3 ~TN5130 K! when 0.05 of La is replaced by yttrium. Important results of ferromagnetic resonance ~FMR! and high-pressure transport studies are as follows. ~i! Data on FMR linewidth and resistivity provide evidence for the presence of microscopic magnetic inhomogeneities, possi...
متن کاملThermodynamic and kinetic assessments of strontium-doped lanthanum manganite perovskites for two-step thermochemical water splitting
Solar-driven thermochemical water splitting using non-stoichiometric oxides has emerged as an attractive technology for solar fuel production. The most widely considered oxide for this purpose is ceria, but the extreme temperatures required to achieve suitable levels of reduction introduce challenges in reactor design and operation, leading to efficiency penalties. Here, we provide a quantitati...
متن کاملSolid state sintering of very low and negative thermal expansion ceramics by Spark Plasma
Lithium aluminosilicate powder precursors of compositions Li2O:Al2O3:SiO2 as 1:1:2; and 1:1:3.11 were synthesized and sintered by the Spark Plasma Sintering technique. The sintering conditions were adjusted to obtain dense ceramic materials in an attempt to avoid the presence of a glassy phase. XRD and SEM images were employed for composition and microstructure characterization. The coefficient...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12060848