Fabrication of Cu-Zn Alloy Nano Powders by Wire Explosion of Electrodeposited Wires
نویسندگان
چکیده
منابع مشابه
Fabrication of the Cu-Zn multilayer and Cu-Zn alloy by accumulative roll bonding (ARB) with an emphasis on the wear behavior
Accumulative roll bonding (ARB) was used to fabricate the Cu-Zn multilayer and Cu-Zn solid solution. A lamellar structure with the hardness of about 130 VHN was formed after eight ARB cycles. Following to the suitable heat treatment, a solid solution with a uniform microstructure and hardness of about 57 VHN was produced. The dominant wear mechanism in the ARB processed multilayer was found to ...
متن کاملProduction of Oxidation-Resistant Cu-Based Nanoparticles by Wire Explosion
The low performance or high cost of commercially available conductive inks limits the advancement of printed electronics. This article studies the explosion of metal wires in aqueous solutions as a simple, low-cost, and environmentally friendly method to prepare metallic nanoparticles consisting of Cu and Cu alloys for use in affordable, highly conductive inks. Addition of 0.2 M ascorbic acid t...
متن کاملSynthesis of Cu-CuO and Cu-Cu2O Nanoparticles via Electro-Explosion of Wire Method
We report an investigation on the synthesis of Copper Oxide nanostructures via the Electro-Explosion of Wire method. Cu-CuO and Cu-Cu2O nanoparticles with mean particle size of 21.1 to 59.1 nm were synthesized by changing the applied current density and amount of used Tetra Methyl Ammonium Hydroxide as the surfactant. The X-ray diffraction analysis, field emission scanning ele...
متن کاملfabrication of the cu-zn multilayer and cu-zn alloy by accumulative roll bonding (arb) with an emphasis on the wear behavior
accumulative roll bonding (arb) was used to fabricate the cu-zn multilayer and cu-zn solid solution. a lamellar structure with the hardness of about 130 vhn was formed after eight arb cycles. following to the suitable heat treatment, a solid solution with a uniform microstructure and hardness of about 57 vhn was produced. the dominant wear mechanism in the arb processed multilayer was found to ...
متن کاملNanopowders produced by electrical explosion of wires
Electrical explosion of wires (EEW) is a method for production of nanopowders. Depending on type of chemical composition of working ambient in the discharge chamber nanopowders of carbides can be produced (EEW in hydrocarbons) or nanopowders of oxides (EEW in oxygen contained medium). Phase compositions of nanopowders prepared by electrical explosion of tungsten and aluminium wires in liquid an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Powder Metallurgy Institute
سال: 2007
ISSN: 1225-7591
DOI: 10.4150/kpmi.2007.14.1.038