FABRICATION OF CONTINUOUS ADSORBER FOR DIRECT TREATMENT OF ELECTROPLATING WASTE WATER USING DRIED FLOWER WASTE

Chrome Electroplating Waste BAT

During the past several years, waste produced by the electroplating industry has attracted attention due to the level of pollutants found in the waste stream, the difficulty associated with treatment, and the cost of waste disposal. EPA has enacted regulations to control the discharge from plating facilities and estimates that 140 million lb of metal pollutants will be prevented from being disc...

Waste Water Treatment using MBR

Treatment of Textile Waste Water with Organoclay

In this study a sample of bentonite obtained from Semnan mines, was modified by a surfactant to prepare an organoclay with high surface area. BET analysis showed that the modification increased its surface significantly. The prepared sorbent was used for removal of dyes and other organic pollutants from a waste water obtained from Ekbatan textile company. Adsorption was studied in ...

chemical recycling of polycarbonate waste using conventional heating and microwave assisted method

پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...

A Study on removal of chromium from tannery effluent treatment of chrome tanning waste water using tannery solid waste

This study illustrates the process of removal of chromium from chrome tanning waste-water by fly ash which was drive from chrome shaving dust. This experiment was carried out in a batch process with laboratory prepared adsorbent samples and chrome tanning water collected from local tanneries. The influence of various factors likes adsorbent doses, contact time, and initial concentration of chro...