Fabrication of Commercial Nanoporous Alumina by Low Voltage Anodizing
نویسندگان
چکیده
منابع مشابه
Nanoporous Titanium Oxide Morphologies Produced by Anodizing of Titanium
A quick and dependable technique has been developed that allows us to selectively produce anodized TiO2 in the form of nanotubes. The process employs mild chemical conditions and ambient temperature. The method can consistently produce nearly 100% surface coverage of nanotubes within 10 min of anodizing. Anodizing in relatively high pH electrolytes for 1 hour permitted us to produce nanotubes o...
متن کاملA Low Cost Method for Manufacturing of Aluminum / Alumina Composite by Anodizing and CRB Process :
A Low Cost Method for Manufacturing of Aluminum/Alumina Composite by Anodizing and CRB Process: Roohollah Jamaati1; Mohammad Reza Toroghinejad1; E. Zahrani1; 1Isfahan University of Technology In this work, Al/Al2O3 composite strips are manufactured by a low cost method consist cold roll bonding (CRB) process of anodized aluminum strips. This technique has the flexibility to control the volume f...
متن کاملInvestigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملFabrication of ordered nanoporous anodic alumina prepatterned by mold-assisted chemical etching
In this article, a simple and cost-effective method to create patterned nanoindentations on Al surface via mold-assisted chemical etching process is demonstrated. This report shows the reaction-diffusion method which formed nanoscale shallow etch pits by the absorption/liberation behaviors of chemical etchant in poly(dimethylsiloxane) stamp. During subsequent anodization, it was possible to obt...
متن کاملRapid fabrication of self-ordered porous alumina with 10-/sub-10-nm-scale nanostructures by selenic acid anodizing
Anodic porous alumina has been widely investigated and used as a nanostructure template in various nanoapplications. The porous structure consists of numerous hexagonal cells perpendicular to the aluminum substrate and each cell has several tens or hundreds of nanoscale pores at its center. Because the nanomorphology of anodic porous alumina is limited by the electrolyte during anodizing, the d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Egyptian Journal of Chemistry
سال: 2018
ISSN: 2357-0245
DOI: 10.21608/ejchem.2017.2189.1175