Fabrication of κ-Carrageenan Fibers by Wet Spinning: Spinning Parameters
نویسندگان
چکیده
منابع مشابه
Fabrication of κ-Carrageenan Fibers by Wet Spinning: Spinning Parameters
This study demonstrates the fabrication of κ-carrageenan fibers by a wet-spinning method and discusses three important spinning parameters: coagulation bath composition, spinning rate and post-spinning mechanical drawing. The as-spun fiber diameter decreased with KCl and ethanol concentration in the coagulation bath. In general, the ultimate tensile stress and elongation at break both increased...
متن کاملFabrication of Defect-Free Cellulose Acetate Hollow Fibers by Optimization of Spinning Parameters
Spinning of cellulose acetate (CA) with the additive polyvinylpyrrolidone (PVP) in N-methyl-2-pyrrolidone (NMP) solvent under different conditions was investigated. The spinning parameters of air gap, bore fluid composition, flow rate of bore fluid, and quench bath temperature were optimized based on the orthogonal experiment design (OED) method and multivariate analysis. FTIR and scanning elec...
متن کاملWet-spinning assembly of continuous, neat, and macroscopic graphene fibers
Graphene is now the most attractive carbon-based material. Integration of 2D graphene sheets into macroscopic architectures such as fibers illuminates the direction to translate the excellent properties of individual graphene into advanced hierarchical ensembles for promising applications in new graphene-based nanodevices. However, the lack of effective, low-cost and convenient assembly strateg...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملParameters of spinning FM reticles.
The literature describes tracking devices that allow a single detector coupled to a spinning FM reticle to determine target location. The spinning FM reticles presented were limited to single parameter reticles of frequency vs angle, frequency vs radius, or phase. This study presents these parameters with their capabilities and limitations and shows that multiple parameters can be integrated in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2011
ISSN: 1996-1944
DOI: 10.3390/ma4101805