Fabrication of An Ultra-red Hologram Optical Element with Reactive Ion Etching.

Reactive ion etching

The reactive ion etching ofInP, InGaAs, and InAIAs in CClzF2/02 or C2R(/H2 discharges was investigated as a function of the plasma parameters pressure, power density, flow rate, and relative composition. The etch rates of these materials are a factor of 3-5 X faster in CC12F 2/0 2 (-600--1000 AminJ ) compared to CzHJH2 (160-320 AminI ). Significantly smoother morphologies are obtained with C2H6...

Fabrication of GaN-based Photonic Crystal Structures by Reactive Ion Etching 87 Fabrication of GaN-based Photonic Crystal Structures by Reactive Ion Etching

The fabrication of the 2D GaN-based photonic crystal structure at optical scales, a subμm scale in our case is very challenging. In our work, a double-etching method proved to be feasible to achieve the periodic GaN/air variation. The pattern was defined in a PMMA resist by electron-beam lithography and transferred to SiO2 by reactive ion etching (RIE) in a CF4 plasma and further into GaN by RI...

Deep Reactive Ion Etching (DRIE)

Reactive ion etching of GaN using WI3

Reactive ion etching with SiCl, and BCls of high quality GaN films grown by plasma enhanced molecular beam epitaxy is reported. Factors such as gas chemistry, flow rate, and microwave power affecting the etching rate are discussed. The etch rate has been found to be larger with BCls than with SiC14 plasma. An etch rate of 8.5 &s was obtained with the BCl, plasma for a plasma power of 200 W, pre...

Reactive Ion Etching of Benzocyclobutene Polymer Films

Reactive ion etching is a widely-used technique for fabricating via holes in polymer-metal multilayer interconnect structures. Reactive ion etching of thin film polymers was studied using Benzocyclobutene polymer and photoresist etch mask, in O2 and SF6 plasma. A design of experiments (DOE) was carried out with rf power, pressure, and SF6 concentration as the design variables, with a constant t...