Fabrication of Aluminium Nanowires by Differential Pressure Injection
نویسندگان
چکیده
منابع مشابه
Investigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملThe Fabrication of Scintillator Column by Hydraulic Pressure Injection Method
Cesiumiodide with Na doping (CsI(Na)) solution or melt is easily forming threedimension dendrites on the free surface. The defects or bobbles form inside the CsI(Na) during the solution or melt solidification. The defects or bobbles can further effect the x-ray path in the CsI(Na) crystal and decrease the scintillation characteristics of CsI(Na). In order to enhance the CsI(Na) scintillated pro...
متن کاملElectrochemical fabrication of Cu/Pd multilayer nanowires in polycarbonate template
In this work,copper/palladium (Cu/Pd) multilayer nanowires were successfully prepared by electrodeposition method using polycarbonate template. The fabrication of Pd/Cu multilayer nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The morphological properties of the nanowires were studied by scanning electron microscopy (SEM) and resu...
متن کاملFabrication of silicon nanowires
Pentagon-shaped silicon wires with linewidth around 300 nm are successfully fabricated by using the Si/SiGe epitaxy technique, reactive ion etching, and subsequent selective chemical etching. The nanowires are oxidized in wet O2 at 750 ◦C and 850 ◦C. The oxide and interface morphology are characterized by cross-sectional scanning electron microscope images. It is found that the oxidized nanowir...
متن کاملOxidation-assisted ductility of aluminium nanowires.
Oxidation can drastically change mechanical properties of nanostructures that typically have large surface-to-volume ratios. However, the underlying mechanisms describing the effect oxidation has on the mechanical properties of nanostructures have yet to be characterized. Here we use reactive molecular dynamics and show that the oxidation enhances the aluminium nanowire ductility, and the oxide...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISRN Nanomaterials
سال: 2013
ISSN: 2090-8741
DOI: 10.1155/2013/132798