Fabrication of Alumina Nanotubes and Nanowires by Etching Porous Alumina Membranes

Controlled fabrication of patterned lateral porous alumina membranes.

Confined lateral alumina templates are fabricated with different pore sizes by changing the acid electrolyte and the anodization voltage. The control of the number of pore rows down to one dimension is also achieved, by controlling the thickness of the starting aluminum film as well as the anodization voltage. We observe that the mechanism of pore formation in the lateral regime is very similar...

Fabrication of a porous anodic alumina membrane

With the aim of developing a process for surface enlargement on an electrode for measuring brain activity attempts have been made to fabricate a porous anodic alumina membrane directly on the electrode. The porous membrane was intended to be used as scaffold for deposition of an electrically conducting polymer on the electrode surface. A silicon wafer with gold electrodes was the base onto whic...

Fabrication of nanomaterials using porous alumina templates

Nanofabrication by self-organization methods has attracted much attention owing to the fact that it enables mass production without the use of expensive lithographical tools, such as an electron beam exposure system. Porous alumina can be fabricated electrochemically through anodic oxidation of aluminum by means of such a self-organization method, yielding highly ordered arrays of nanoholes sev...

Fabrication of nanowires and nanotubes by anodic alumina template-assisted electrodeposition

The synthesis of alumina nanowires on the surface of a porous alumina membrane

Porous aluminum oxide membranes with a complete and even covering of alumina nanowires were formed in a one-step anodization process in dilute phosphoric acid electrolyte. The anodizing conditions can be adjusted to start forming alumina wires that originate on the surface of the porous alumina layer at the triple junction points (the edges of the hexagonal inter-pore structure where three pore...