Fabrication of Al-SiC Composites Using a Hot-Forging Technique and Their Thermal Conductivity.
نویسندگان
چکیده
منابع مشابه
High Thermal Conductivity SiC/SiC Composites for Fusion Applications
SiC-SiC composites offer excellent potential for fusion energy as well as numerous commercial applications. High manufacturing cost and very low through-the-thickness (transverse) thermal conductivity (below 15 W/mK) hinders wider applications of SiC/SiC composites. To overcome these obstacles, a low-cost, Chemical Vapor Reaction (CVR) process was developed to fabricate crystalline, high purity...
متن کاملFabrication and Characterization of In Situ Synthesized SiC/Al Composites by Combustion Synthesis and Hot Press Consolidation Method
The in situ SiC/Al composites were fabricated in Al-Si-C systems with different Si/C mass ratios and holding time by the method of combustion synthesis and hot press consolidation. The influences of Si/C mass ratio and holding time on the phase constitution, microstructure, and hardness of the composites were investigated. The results indicate that the increase of Si/C mass ratio leads to more ...
متن کاملThermal Conductivity of Diamond Composites
A major problem challenging specialists in present-day materials sciences is the development of compact, cheap to fabricate heat sinks for electronic devices, primarily for computer processors, semiconductor lasers, high-power microchips, and electronics components. The materials currently used for heat sinks of such devices are aluminum and copper, with thermal conductivities of about 250 W/(m...
متن کاملProcessing and Characterization of AA2024/Al2O3/SiC Reinforces Hybrid Composites Using Squeeze Casting Technique
The present requirement of automobile industry is seeking lightweight material that satisfices the technical and technological requirements with better mechanical and tribological characteristics. Aluminium matrix composite ( AMC ) materials meet the requirements of the modern demands. AMCs are used in automotive applications as engine cylinders, pistons, disc and drum brakes. This paper inves...
متن کاملThermal Conductivity of Cu and Al-Water Nanofluids
Nanofluids are suspensions of nanoparticles in the base fluids, a new challenge for thermal sciences provided by nanotechnology. In this paper, the tested fluids are prepared by dispersing the Al and Cu into water at three different concentrations such as 500, 1000 and 2000 ppm. Thermal conductivities of these fluids are measured experimentally by thermal property analyzer i.e. KD2 Pro by using...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2002
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.110.1016