Fabrication of a Nanofluidic Channel for SPR Sensing Application Using Glass-to-Glass Anodic Bonding
نویسندگان
چکیده
منابع مشابه
Fabrication and characterization of 20 nm planar nanofluidic channels by glass-glass and glass-silicon bonding.
We have characterized glass-glass and glass-Si bonding processes for the fabrication of wide, shallow nanofluidic channels with depths down to the nanometer scale. Nanochannels on glass or Si substrate are formed by reactive ion etching or a wet etching process, and are sealed with another flat substrate either by glass-glass fusion bonding (550 degrees C) or an anodic bonding process. We demon...
متن کاملA Microsystem Based on Porous Silicon-Glass Anodic Bonding for Gas and Liquid Optical Sensing
We have recently presented an integrated silicon-glass opto-chemical sensor for lab-on-chip applications, based on porous silicon and anodic bonding technologies. In this work, we have optically characterized the sensor response on exposure to vapors of several organic compounds by means of reflectivity measurements. The interaction between the porous silicon, which acts as transducer layer, an...
متن کاملStudy on the Glass Silicon Anodic Direct Bonding Parameters
By MEMS packaging test platform for bonding process of bonding temperature and bonding time, and test silicon specifications experimental study. Experimental results indicate that when the bonding voltage of 1200V, bonding temperature of 445 0 C to 455 0 C, bonding time is 60s, the void fraction is less than 5%. Glass and silicon wafer bonding quality can achieve the best. The experimental resu...
متن کاملA new approach for fabrication of bulk MMCs using Accumulative Channel-die Compression Bonding (ACCB)
A new severe plastic deformation (SPD) based technique entitled Accumulative channel-die compression bonding (ACCB) is proposed for the fabrication of high strength multi-layered Al/Cu composites for the first time. In order to primarily demonstrate the capabilities of ACCB in the fabrication of metal matrix composites (MMCs), AA 1050 and pure Cu strips were processed. The primary Al/Cu sandwic...
متن کاملRapidly prototyped three-dimensional nanofluidic channel networks in glass substrates.
Microfluidic and nanofluidic technologies have long sought a fast, reliable method to overcome the creative limitations of planar fabrication methods, the resolution limits of lithography, and the materials limitations for fast prototyping. In the present work, we demonstrate direct 3D machining of submicrometer diameter, subsurface fluidic channels in glass, via optical breakdown near critical...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electrochemistry
سال: 2006
ISSN: 2186-2451,1344-3542
DOI: 10.5796/electrochemistry.74.169