Fabrication of 5-Nitrosalicylaldehyde with Aniline as Sensitizer for Dye Sensitized Solar Cells

Objectives: To create a DSSC circuit, combine 5-Nitro Salicylaldehyde with Aniline (5NSA). Methods: Working and counter electrodes are made of TiO2 activated carbon film. Digital multimeters used to test the conductive side FTO glass prior deposition. Graphite is as electrode. A functioning electrode was developed on glass. plate edges Scotch tape (on determined by multimeter). Distribute three drops blade-coated equally using stirring stick. 5-nitrosalicylaldehyde aniline dye applied working I-/KI electrolytes. An electrolyte KI solution. I-V P-V properties were examined in direct sunshine solar simulator. Findings: Using digital multimeter simulator plates, analyzed efficiency Mayiladuthurai (L1), Nagapattinam (L2), Vedaranyam (L3). The constructed salicylaldehyde an circuits obtained sunlight from combination 5NSA (L1-2.95 % ;L2-2.3 ;L3-4.4 %) open circuit voltage (Voc) (L1-26 mV;L2-38mV ;L3-39mV) short current density (Isc) (L1-80 mA;L2-60 (L1- 1.42 ; L2- .1.01 L3-1.9 ). Different glasses determine lowest maximum light locations discovered 5.8mV frosted lamp position 5 fill factor 8% plain 5(0.92%). Novelty: pigments optimized agents exhibited improved photovoltaic properties, absorbed more sunlight, utilized photon energy effectively. Keywords: Aniline; Dye Sensitized Solar Cells (DSSC); 5Nitro Salicylaldehyde; simulator; Titanium Dioxide (TiO2 )