Fabrication of 25 μ m-filter microfluidic chip on silicon substrate
نویسندگان
چکیده
منابع مشابه
In-Flow DNA Extraction Using on-Chip Microfluidic Amino-Coated Silicon Micropillar Array Filter
A silicon micropillar filter (μPF) chip was fabricated, glass-bonded, coated with 3-aminopropyltriethoxysilane (APTES) then tested for its ability to bind and release pre-purified DNA in continuous flow mode. APTES coated steps were used, which allowed direct detection of obtained DNA using UV Nano-Droplet. Both the capture efficiency and elution % were inversely proportional to flow rate, with...
متن کاملDevelopment and fabrication of nanoporous silicon-based bioreactors within a microfluidic chip.
Multi-scale lithography and cryogenic deep reactive ion etching techniques were used to create ensembles of nanoporous, picolitre volume, reaction vessels within a microfluidic system. The fabrication of these vessels is described and how this process can be used to tailor vessel porosity by controlling the width of slits that constitute the vessel pores is demonstrated. Control of pore size al...
متن کاملA77 GHz On-Chip Dipole Antenna with Etched Silicon Substrate
In this paper, a 77 GHz microstrip dipole antenna is integrated on a layered 11.4 μm SiO2 and a silicon substrate with thickness of 670 μm. The unbalanced microstrip line is balanced by using a lumped LC circuit balun to feed both of the dipole arms. To decrease the substrate loss and hence increase the antenna gain, Localized Backside Etch (LBE) module offered by IHP is utilized to etch the ar...
متن کاملFabrication of a modular tissue construct in a microfluidic chip.
By combining microfluidics and soft-lithographic molding of gels containing mammalian cells, a device for three-dimensional (3D) culture of mammalian cells in microchannels was developed. Native components of the extracellular matrix, including collagen or Matrigel, made up the matrix of each molded piece (module) of cell-containing gel. Each module had at least one dimension below approximatel...
متن کاملSilicon Nanoribbon FET Sensors: Fabrication, Surface Modification and Microfluidic Integration
Over the past decade, the field of medical diagnostics has seen an incredible amount of research towards the integration of one-dimensional nanostructures such as carbon nanotubes, metallic and semiconducting nanowires and nanoribbons for a variety of bio-applications. Among the mentioned one-dimensional structures, silicon nanoribbon (SiNR) field-effect transistors (FET) as electro-chemical na...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Natural Sciences: Nanoscience and Nanotechnology
سال: 2017
ISSN: 2043-6262
DOI: 10.1088/2043-6254/8/1/015003