Fabrication and spontaneous infiltration process analysis of particulate reinforced Mg composites.
نویسندگان
چکیده
منابع مشابه
Fracture Analysis of Particulate Reinforced Metal Matrix Composites
A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...
متن کاملPreparation and Characterization of B 4 C Particulate Reinforced Al - Mg Alloy Matrix Composites
This paper describes the fabrication and mechanical testing of Al-Mg-boron carbide particulate composites using stir casting technique. The size of the boron carbide particulates is ranging between 30 to 100 μm. The boron carbide contents are varied from 3 and 7% by weight and are dispersed in the alloy matrix. The mechanical properties of the castings, particularly their tensile properties and...
متن کاملAnalysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE)
Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...
متن کاملFabrication and Testing of Natural Fiber Reinforced Hybrid Composites
Work has been carried out to investigate the flexural properties of composites made by reinforcing banana and pineapple as the new natural fibers into epoxy resin matrix. The natural fibers were extracted by retting and manual process. The composites are fabricated using banana and pineapple fiber reinforcements. Hybrid composites were prepared using banana/pineapple fibers of 0/40, 15/25, 20/2...
متن کاملFabrication and Characterization of Cellulosic Nanofiber Reinforced Composites
Environment-friendly “green” nanocomposites were fabricated from a starch-based, dispersion-type biodegradable resin and cellulose nanofibers. The mixture of the dispersion-type biodegradable resin and cellulose nanofibers were blended well by using a mixer and/or a stirrer. Composites were prepared by conventional hot pressing at a constant temperature of 140oC and at pressures from 10 to 50 M...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1995
ISSN: 0451-5994
DOI: 10.2464/jilm.45.321