Fabrication and Properties of Alkaline Lignin / Poly (Vinyl Alcohol) Blend Membranes

Fabrication and Properties of Alkaline Lignin / Poly (Vinyl Alcohol) Blend Membranes

Membranes were prepared from alkaline lignin and poly(vinyl alcohol) (PVA) by a film casting method, and their properties were evaluated. These blend membranes can aptly be termed as green by nature as they are totally non-toxic and eco-friendly. The optimal mass ratio was determined based on the mechanical properties of membranes. The microstructure, mechanical properties, oxygen and carbon di...

Biological Properties of Blend Nanofibrous Scaffolds from Poly(caprolactone)-Chitosan-Poly(vinyl alcohol)

Pervaporation of alcohol-toluene mixtures through polymer blend membranes of poly ( acrylic acid) and poly (vinyl alcohol)

Homogeneous membranes were prepared by blending poly (acrylic acid) with poly (vinyl alcohol). These blend membranes were evaluated for the selective separation of alcohols from toluene by pervaporation. The flux and selectivity of the membranes were determined both as a function of the blend composition and of the feed mixture composition. The results showed that a polymer blending method coul...

Cellulose Nanocrystals/ZnO as a Bifunctional Reinforcing Nanocomposite for Poly(vinyl alcohol)/Chitosan Blend Films: Fabrication, Characterization and Properties

In this study, cellulose nanocrystals/zinc oxide (CNCs/ZnO) nanocomposites were dispersed as bifunctional nano-sized fillers into poly(vinyl alcohol) (PVA) and chitosan (Cs) blend by a solvent casting method to prepare PVA/Cs/CNCs/ZnO bio-nanocomposites films. The morphology, thermal, mechanical and UV-vis absorption properties, as well antimicrobial effects of the bio-nanocomposite films were ...

Role of Nano-Sized TiO2 on Mechanical and Thermal Behavior of Starch/Poly (vinyl alcohol) Blend Films

A novel Starch/Poly (vinyl alcohol)/nano-Titanium dioxide (ST/PVA/nano-TiO2) biodegradable nanocomposite film was prepared by homogeneously dispersed TiO2 nanoparticles in different ratios of starch/PVA-based materials, via a solution casting method. Glycerol was used as plasticizer. The mechanical and thermal properties of films were studied using tensile and perforation strength tests and the...