Fabrication and Microstructure Characterization of Cold Sprayed Al-SiCp Nanocomposite Coating
نویسندگان
چکیده
A dense Al-SiCp nanocomposite coating with high volume fraction of nano SiCp reinforcement (60 vol.%) was fabricated through cold spraying deposition milled Al-60SiCp powder in the present paper. Microstructure evolution during ball milling process, microstructure characteristics and hardness sprayed were studied. Al particles underwent fracture deformation SiC evenly distributed soft base material after milling. Dense composite had been successfully prepared solidification powder. Nano uniformly as-sprayed composites coating. Microhardness highly reach up to 530±53 Hv0.3 compared 34±3 for pure bulk.
منابع مشابه
Microstructure Characterization and Mechanical Properties of Al-SiCp Composites
In recent years the aluminum matrix composites are gaining wide spread applications in automotive, aerospace, defense, sport and other industries. The reason for this is their exciting properties like high specific strength, stiffness, hardness, wear resistance, dimensional stability and designer flexibility. The present work reports on mechanical properties and microstructure analysis of Al-Si...
متن کاملmicrostructure characterization and mechanical properties of al-sicp composites
in recent years the aluminum matrix composites are gaining wide spread applications in automotive, aerospace, defense, sport and other industries. the reason for this is their exciting properties like high specific strength, stiffness, hardness, wear resistance, dimensional stability and designer flexibility. the present work reports on mechanical properties and microstructure analysis of al-si...
متن کاملSliding-induced Microstructure of Cold-Sprayed Copper Coating Observed by Electron Channeling Contrast Imaging
Cold gas dynamic spray is a coating process for fabrication of materials that are sensitive to heat and oxidation such as copper [1]. In cold spray, the particles are accelerated to supersonic velocities typically between 500 1200 m/s [1]. Upon high speed impact, the cold sprayed particles undergo extensive plastic deformation at very high strain-rates (up to 10 9 s -1 near impact interfaces), ...
متن کاملTransmission electron microscopy of cold sprayed 1100 aluminum coating
Cold-spraying of 1100 Al powder particles onto 1100 Al substrate was accomplished using carrier gases 100 vol.% He and a mixture of He–20 vol.% N2. TEM characterization correlates very well the occurrence of dislocations, presence of oxide, and surface instability phenomenon with observed mechanical and corrosion properties of the cold-sprayed coating. 2005 Acta Materialia Inc. Published by Els...
متن کاملSYNTHESIS AND CHARACTERIZATION OF AN ENVIRONMENTALLY-FRIENDLY HYBRID NANOCOMPOSITE COATING
In this research, a kind of environmentally-friendly inorganic-organic hybrid nanocomposite coating based on silica containing titania/silica core/shell nanoparticles was synthesized and characterized for conservation of facade tiles in historical buildings. The matrix of the composite was prepared by sol-gel process via two methods of ultrasonic and reflux stirring. Tetraethyl orthosilicate (T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in transdisciplinary engineering
سال: 2022
ISSN: ['2352-751X', '2352-7528']
DOI: https://doi.org/10.3233/atde220429