Fabrication and mechanical properties of TiB2-ZrO2 sintered body.
نویسندگان
چکیده
منابع مشابه
Fabrication and Mechanical Properties of Sintered Leucite Body
for leucite using natural minera} potash feldspar as the major raw material, followed by bal) milling. A sintered leucite body with a 99.0% re)atiye density was obtained by heating the leucite powder cylindrical pellet at 12500C for 1 h. The mechanical properties of this dense teucite body were determined. The bending strength, fracture toughness, e)astic modulus and Vickers hardness of the bod...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMicrostructure and Mechanical Properties of Microwave Sintered ZrO2 Bioceramics with TiO2 Addition
The microwave sintered zirconia ceramics with 0, 1, 3, and 5 wt% TiO2 addition at a low sintering temperature of 1300°C and a short holding time of 1 hour were investigated. Effect of contents of TiO2 addition on microstructure and mechanical properties of microwave sintered zirconia bioceramics was reported. In the sintered samples, the main phase is monoclinic zirconia (m-ZrO2) phase and mino...
متن کاملMicrostructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...
متن کاملElectron Holography of Charging Effect in ZrO2 Sintered Body
The effects of charging on a ZrO2 sintered body due to electron irradiation were investigated by means of electron holography. The charging effects were quantitatively evaluated as a function of the incident electron density. The ZrO2 sintered body was positively charged within a transmission electron microscope. By means of simulations taking into account reference wave modulation due to a lon...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1989
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.36.100