Fabrication and electrochemical performance of lithium polymer battery using mesoporous silica/polymer hybrid electrolyte
نویسندگان
چکیده
منابع مشابه
Polystyrene-Al2O3 composite solid polymer electrolyte for lithium secondary battery
In a common salt-in-polymer electrolyte, a polymer which has polar groups in the molecular chain is necessary because the polar groups dissolve lithium salt and coordinate cations. Based on the above point of view, polystyrene [PS] that has nonpolar groups is not suitable for the polymer matrix. However, in this PS-based composite polymer-in-salt system, the transport of cations is not by segme...
متن کاملImproved electrochemical performance of SnO2-mesoporous carbon hybrid as a negative electrode for lithium ion battery applications.
To utilize the high specific capacity of SnO2 as an anode material in lithium-ion batteries, one has to overcome its poor cycling performance and rate capability, which result from large volume expansion (∼300%) of SnO2 during charging-discharging cycles. Hence, to accommodate the volume change during cycling, SnO2 nanoparticles of 6 nm diameter were synthesized specifically only on the outer s...
متن کاملEnhanced electrochemical performance of Lithium-ion batteries by conformal coating of polymer electrolyte
This work reports the conformal coating of poly(poly(ethylene glycol) methyl ether methacrylate) (P(MePEGMA)) polymer electrolyte on highly organized titania nanotubes (TiO2nts) fabricated by electrochemical anodization of Ti foil. The conformal coating was achieved by electropolymerization using cyclic voltammetry technique. The characterization of the polymer electrolyte by proton nuclear mag...
متن کاملLarge Lithium Polymer Battery Modeling for the Simulation of Hybrid Electric Vehicles Using the Equivalent Circuit Method
In the present study, a model of a large Lithium Polymer (Li-Po) battery for use in the simulation of Hybrid Electric Vehicles (HEVs) is developed. To attain this goal, an Equivalent Circuit (EC) consisting of a series resistor and two RC parallel networks is considered. The accuracy and the response time of the model for use in an HEV simulator are studied. The battery parameters identifica...
متن کاملHigh‐Performance Lithium‐Oxygen Battery Electrolyte Derived from Optimum Combination of Solvent and Lithium Salt
To fabricate a sustainable lithium-oxygen (Li-O2) battery, it is crucial to identify an optimum electrolyte. Herein, it is found that tetramethylene sulfone (TMS) and lithium nitrate (LiNO3) form the optimum electrolyte, which greatly reduces the overpotential at charge, exhibits superior oxygen efficiency, and allows stable cycling for 100 cycles. Linear sweep voltammetry (LSV) and differentia...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2013
ISSN: 1882-0743,1348-6535
DOI: 10.2109/jcersj2.121.723