Fabrication and Different Characterization of Graphene Nano Platelets Reinforced Epoxy Nano Composites
نویسندگان
چکیده
منابع مشابه
Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets
The processing conditions for preparing well dispersed silica-graphene nanoplatelets and silica-graphene oxide nanoplatelets (GONP) composites were optimized using powder and colloidal processing routes. Fully dense silica-GONP composites with up to 2.5 vol% loading were consolidated using spark plasma sintering. The GONP aligned perpendicularly to the applied pressure during sintering. The fra...
متن کاملSynthesis & Mechanical Characterization of Carbon/Epoxy Composites Reinforced with SiC Nano Particles
Room temperature cure epoxy resin has been doped with SiC nanoparticles through an ultrasonic cavitation process. The modified resin was then utilized in a Vacuum Assisted Resin Transfer Molding (VARTM) process with satin weave carbon fibers to manufacture nanophased composite panels. The nanoparticles were spherical in shape and about 29 nm in diameter. The loading of nanoparticles into the re...
متن کاملFabrication and Characterization of Nanostructured TiO2 and Turmeric Spent Incorporated Polystyrene Hybrid Nano Composites
A series of polystyrene hybrid nanocomposites have been fabricated with varying amounts of TiO2 viz., 0, 0.5 and 1 % w/w along with 3% TS by in-situ polymerization method. The influence of surface modified TiO2 nanoparticles on the thermal properties of PS matrix was examined using thermogravimetry and differential scanning calorimetry. Thermal characteristics of the polystyrene/TS/TiO2 hybrid ...
متن کاملMechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites
In the current research work synthesis, characterization, mechanical and wear behavior of 5 and 10 wt. % of nano TiO2 particulates reinforced Al7075 alloy composites are inspected. The Al7075 alloy and nano TiO2 particle composites were provided by melt stir system. After the preparation, the prepared composites were analyzed by SEM, EDS, and XRD for inquiring the microstr...
متن کاملFabrication, Characterization and Osteoblast Response of Cobalt-Based Alloy/Nano Bioactive Glass Composites
IIn this work, cobalt-based alloy/ nano bioactive glass (NBG) composites with 10, 15 and 20 wt% NBG were prepared and their bioactivity after immersion in simulated body fluid (SBF) for 1 to 4 weeks was studied. The scanning electron microscopy images of two- step sintered composites revealed a relatively dense microstructure the density of which decreased with the increase in the NBG amount. M...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Metallurgy and Materials
سال: 2023
ISSN: ['1733-3490', '2300-1909']
DOI: https://doi.org/10.24425/amm.2023.143675