Fabrication and characterization of Ni–SiC–Cr nanocomposite coatings

Fabrication and Characterization of Polyimide/AlN Nanocomposite Films

Polymers with good insulating properties are widely used in motors, rotating machines and components in power electronics and microelectronics1-3. It is well know that polymer properties can be greatly improved by adding inorganic fillers to form composite polymer. Polyimide has been a polymer of choice in many areas owing to its excellent dielectric properties, high thermal mechanical strength...

Nanocomposite Based Multifunctional Coatings

Preparation, Characterization and Abrasion Resistance Property of Melamine Formaldehyde / Montmorillonite Nanocomposite Coatings

This study investigates preparation of melamine formaldehyde / montmorillonite nanocomposite coatings and evaluates its abrasion resistance property as a new material for wood based panel products. The ultrasonicated MF resin/clay blends with different clay loadings were applied in the form of coatings to the saturated decorative paper to prepare thermoset prepregs. Morphology and structure of ...

Advanced Characterisation of Nanocomposite Coatings

Nanocomposite coatings are systems comprised of two or more phases. Such multiphase coatings are becoming increasingly important as they offer the possibility of tailoring the coating architecture and achieving exciting new properties. An understanding of the coating nanostructure is important to complete the classic processing-structure-properties relationship and expedite the development of n...

On the fabrication and characterization of Al5083/Al2O3 surface nanocomposite via friction stir processing

In the present study, Al5083- Al2O3 nanocomposite was successfully prepared by friction stir processing (FSP) with rotational speed of 710 rpm and travel speed of 14 mm/min. In order to improve distribution of Al2O3 particles, a net of holes were designed on the surface of Al5083 sheet. The samples were characterized by optical and scanning electron microscopy (SEM), microhardness, tensile and ...