Fabrication and Characterization of Hydrophobic Porous Metallic Membranes for High Temperature Applications
نویسندگان
چکیده
Hydrophobic porous metallic membranes can be integrated in a microreactor for situ separation of steam at high temperatures. This study investigates the fabrication and characterization hydrophobic coatings on substrates. Two different coating methods were explored: (1) Plasma Enhanced—Chemical Vapor Deposition (PE-CVD) to form amorphous carbon silicon-doped a-C:H:Si:O thin films (2) Direct Immersion fluoroalkyl silane (FAS-13) solution using dip Self-Assembled Monolayers. The results wettability as well SEM images EDS/WDS analyses indicate that coated sintered stainless steel are adequate surfaces, maintaining porosity substrate withstanding Especially FAS-13 shows very good resistance temperatures higher than 250 °C. These findings special significance metal temperature applications.
منابع مشابه
Silane decorated metallic nanorods for hydrophobic applications
A novel technique to modify a metallic surface for anti-icing applications is presented. An oblique angle deposition (OAD) technique has been used to fabricate metallic nanorods of Aluminum and Tungsten on a glass substrate. A conformal coating of a silane has been applied using a molecular vapor deposition technique. The resulting surface has shown a static contact angle of 1348 with the water...
متن کاملFabrication and characterization of metallic nanowires
The shape of metallic constrictions of nanoscopic dimensions ~necks! formed using a scanning tunneling microscope is shown to depend on the fabrication procedure. Submitting the neck to repeated plastic deformation cycles makes it possible to obtain long necks or nanowires. Point-contact spectroscopy results show that these long necks are quite crystalline, indicating that the repeated cycles o...
متن کاملFabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications
Different methods have been evaluated for manufacturing the porous Ti6Al4V alloys according to decreasing stress shielding phenomenon and increasing mechanical compatibility between the metallic components and the host tissue. For this purpose, in this work Ti6Al4V alloy chips were pressed under 400 MPa pressure and then samples were categorized and heated into two groups at 1000 and 1150℃ unde...
متن کاملElectrodialysis Heterogeneous Anion Exchange Membranes Filled with TiO2 Nanoparticles: Membranes' Fabrication and Characterization
In the current research, polyvinylchloride based mixed matrix heterogeneous anion exchange membranes were prepared by a solution casting technique. Titanium dioxide nanoparticles were also utilized as inorganic filler additive in the membrane fabrication. The effect of TiO2 nanoparticles concentration in the casting solution on the membrane physico-chemical properties was studied. Membrane wate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processes
سال: 2021
ISSN: ['2227-9717']
DOI: https://doi.org/10.3390/pr9050809