Fabrication and Characterization of Carbon Nanofiber (CNF)-Dispersed SiAION Ceramics via Spark Plasma Sintering (SPS)

Spark Plasma Synthesis (SPS) Device for Sintering of Nanomaterials

It is known that work pieces with nanocrystalline structure condition have much higher performance than those with an ordinary structure. There are known number of techniques for manufacturing of nanocrystalline materials in powder condition however a question of manufacturing bulk pieces in the same nanocrystalline state mentioned is that compaction and synthesizing of nanocrystalline powders ...

Spark-plasma-sintering (SPS) of nanostructured titanium carbonitride powders

Spark-Plasma-Sintering (SPS) compaction experiments of nanostructured titanium carbonitride powders have been performed at 1600°C and 1800°C (sintering time = 1 min). The as-received nanostructured samples have been synthesized by rapid condensation from the gas-phase (high frequency plasma). The sintering results were compared with data obtained by various conventional sintering techniques suc...

Spark Plasma Sintering of Negative Temperature Coefficient Thermistor Ceramics

Optically transparent ceramics by spark plasma sintering of oxide nanoparticles

Novel highly scalable carbon nanotube-strengthened ceramics by high shear compaction and spark plasma sintering

e report a new strategy, based on high shear compaction and spark plasma sintering, for the massive and low cost production of 100% dense eramics containing carbon nanotubes. Custom forming and stacking of flexible green sheets of record-breaking dimensions can yield an unlimited ange of three-dimensional structures. The strategy was successfully validated in the production of multi-walled carb...