Fabrication and Application of SERS-Active Cellulose Fibers Regenerated from Waste Resource
نویسندگان
چکیده
منابع مشابه
FABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملProperties of Lignocellulosic Composites Containing Regenerated Cellulose Fibers
The aim of the paper was to examine the application of regenerated cellulose fibers as a reinforcement material in particleboard production. Single-layer, 10 mm thick panels, with the density of 800 kg/m3 were produced with addition of regenerated cellulose fibers in the range of 0 do 15% by mass during panels’ production. The mechanical and physical parameters of the produced panels were teste...
متن کاملCharacteristics of regenerated nanocellulosic fibers from cellulose dissolution in aqueous solutions for wood fiber / polypropylene composites
The effects of aqueous solutions were evaluated on the properties of regenerated cellulosic nanofibers prepared from pure cellulose fibers in various formulations of aqueous solutions. Thermoplastic composites were prepared with reinforcement of the regenerated cellulosic nanofibers. The regenerated cellulosic fibers from cellulosic woody biomass were obtained from dissolved cellulose solutions...
متن کاملFabrication of nanowire network AAO and its application in SERS
In this paper, nanowire network anodized aluminum oxide (AAO) was fabricated by just adding a simple film-eroding process after the production of porous AAO. After depositing 50 nm of Au onto the surface, nanowire network AAO can be used as ultrasensitive and high reproducibility surface-enhanced Raman scattering (SERS) substrate. The average Raman enhancement factor of the nanowire network AAO...
متن کاملExtraction and Characterization of Cellulose Nanocrystals from Tea Leaf Waste Fibers
The aim was to explore the utilization of tea leaf waste fibers (TLWF) as a source for the production of cellulose nanocrystals (CNC). TLWF was first treated with alkaline, followed by bleaching before being hydrolyzed with concentrated sulfuric acid. The materials attained after each step of chemical treatments were characterized and their chemical compositions were studied. The structure anal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2021
ISSN: 2073-4360
DOI: 10.3390/polym13132142