Fabricating nanowire devices on diverse substrates by simple transfer-printing methods
نویسندگان
چکیده
منابع مشابه
Fabricating nanowire devices on diverse substrates by simple transfer-printing methods.
The fabrication of nanowire (NW) devices on diverse substrates is necessary for applications such as flexible electronics, conformable sensors, and transparent solar cells. Although NWs have been fabricated on plastic and glass by lithographic methods, the choice of device substrates is severely limited by the lithographic process temperature and substrate properties. Here we report three new t...
متن کاملFabrication of nanowire electronics on nonconventional substrates by water-assisted transfer printing method.
We report a simple, versatile, and wafer-scale water-assisted transfer printing method (WTP) that enables the transfer of nanowire devices onto diverse nonconventional substrates that were not easily accessible before, such as paper, plastics, tapes, glass, polydimethylsiloxane (PDMS), aluminum foil, and ultrathin polymer substrates. The WTP method relies on the phenomenon of water penetrating ...
متن کاملSnO2 nanowire logic devices on deformable nonplanar substrates.
Logic inverters consisting of n-type FETs and resistors with SnO(2) nanowire channels were fabricated on films of the elastomer polydimethylsiloxane, prestrained and flattened into planar sheets from initial, preformed hemispherical shapes. Upon release, thin and narrow interconnects between individual devices in the arrays absorb induced strain by buckling into nonplanar sinusoidal shapes, to ...
متن کاملTransfer printing of CVD graphene FETs on patterned substrates.
We describe a simple and scalable method for the transfer of CVD graphene for the fabrication of field effect transistors. This is a dry process that uses a modified RCA-cleaning step to improve the surface quality. In contrast to conventional fabrication routes where lithographic steps are performed after the transfer, here graphene is transferred to a pre-patterned substrate. The resulting FE...
متن کاملA High-yield Two-step Transfer Printing Method for Large-scale Fabrication of Organic Single-crystal Devices on Arbitrary Substrates
Single-crystal organic nanostructures show promising applications in flexible and stretchable electronics, while their applications are impeded by the large incompatibility with the well-developed photolithography techniques. Here we report a novel two-step transfer printing (TTP) method for the construction of organic nanowires (NWs) based devices onto arbitrary substrates. Copper phthalocyani...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the National Academy of Sciences
سال: 2010
ISSN: 0027-8424,1091-6490
DOI: 10.1073/pnas.0914031107