Fabricating MOF/Polymer Composites via Freeze Casting for Water Remediation
نویسندگان
چکیده
منابع مشابه
Bioinspired composites from freeze casting with clathrate hydrates
Freeze casting with isopropanol (IPA)–H2O as a freezing agent has shown the potential to create porous scaffolds with enlarged pores. Though not experimentally proven, this effect has been suggested to be the result of non-stoichiometric structures called clathrate hydrates forming during the freezing process. In this manuscript, we build upon these results to provide experimental evidence of t...
متن کاملReverse freeze casting: a new method for fabricating highly porous titanium scaffolds with aligned large pores.
Highly porous titanium with aligned large pores up to 500 μm in size, which is suitable for scaffold applications, was successfully fabricated using the reverse freeze casting method. In this process we have newly developed, the Ti powders migrated spontaneously along the pre-aligned camphene boundaries at a temperature of 45.5°C and formed a titanium-camphene mixture with an aligned structure;...
متن کاملBiomaterials by freeze casting.
The functional requirements for synthetic tissue substitutes appear deceptively simple: they should provide a porous matrix with interconnecting porosity and surface properties that promote rapid tissue ingrowth; at the same time, they should possess sufficient stiffness, strength and toughness to prevent crushing under physiological loads until full integration and healing are reached. Despite...
متن کاملFabricating and Characterizing Polymers and Composites
Poly-L-lactic acid (PLLA) is a polymer that is currently used in the medical field for sutures and bone pins. Because it is biodegradable, it has the potential to become even more widely used. The atomic structure and material characteristics of PLLA were analyzed. An extruder was used to fabricate the polymer into various thicknesses and shapes. Using a differential scanning calorimeter, the c...
متن کاملReproducibility of ZrO2-based freeze casting for biomaterials.
The processing technique of freeze casting has been intensely researched for its potential to create porous scaffold and infiltrated composite materials for biomedical implants and structural materials. However, in order for this technique to be employed medically or commercially, it must be able to reliably produce materials in great quantities with similar microstructures and properties. Here...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics
سال: 2018
ISSN: 2571-6131
DOI: 10.3390/ceramics1020028