Extrusion of Alumina Ceramics with Hydraulic Alumina without Organic Additives
نویسندگان
چکیده
منابع مشابه
Mullite-alumina functionally gradient ceramics
Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...
متن کاملSurface Contamination of Alumina Ceramics by Carbon
Article history: Received: 01.05.2016. Received in revised form: 25.07.2016. Accepted: 06.09.2016. This study presents the results of investigating the cause of contamination of aluminum oxide ceramics (Al2O3) in the form of brown colored stain. Contaminated ceramic surfaces were examined with the scanning electron microscope (SEM) equipped with the Energy Dispersive Spectrometer (EDS). The res...
متن کاملHertzian Contact Damage in Porous Alumina Ceramics
A study has been made of Hertzian contact damage in compressive shear stress field beneath the contact area. The observed microcrack density increases with grain size, porous and dense liquid-phase-sintered aluminas. Indentation stress–strain curves show increasing nonlinearity as the implying a threshold microstructural scale for crack initiation. In contrast, the micromechanisms controlling f...
متن کاملLow-Temperature Sintering of Alumina with Liquid-Forming Additives
Simultaneous application of colloidal processing and liquidforming additives to alumina resulted in a sintered density of >99% in 1 h at a temperature as low as 1070°C for a commercial high-purity alumina powder at a total dopant level of 2 mol%. The additives were 0.9% CuO + 0.9% TiOz + 0.1% B 2 0 3 + 0.1% MgO. At higher temperatures or after prolonged sintering, the doped alumina ceramic deve...
متن کاملCrack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses.
Mono-phase bio-ceramics (alumina and zirconia) are widely used as femoral heads in total hip replacements (THR) as an alternative to metal devices. Unfortunately, the orthopaedic community reports significant in-vivo failures. Material scientists are already familiar with composites like alumina zirconia. Since both are biocompatible, this could prove to be a new approach to implants. This pape...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2007
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.115.191