Extrusion of 1050 aluminum circular tube with many spiral projections on inside wall

Investigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050

In this paper, torsion extrusion (TE) process on 1050 aluminum alloy was investigated by simulation as a severe plastic deformation (SPD) method and the effects of friction coefficient, angular velocity of the rotating die and punch speed on maximum punch force were studied. A finite element (FE) model was developed to simulate the TE process via DEFORM software. The FE results were validated co...

Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube

Abstract   An empirical investigation was carried out to study convective heat transfer of nanofluid flow inside an inclined copper tube under uniform heat flux condition. Required data are acquired for laminar and hydrodynamically fully developed flow inside round tube. The stable CuO-base oil nanofluid with different nanoparticle weight fractions of 0.5%, 1% and 2% was produced by means of ul...

Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion

Circular simple shear extrusion process was introduced as a new geometry for simple shear extrusion technique to fabricate ultrafine-grained materials. Similar to the simple shear extrusion method, this process is also based on direct extrusion, and the samples deform in a simple shear manner. In this investigation, the simulations were carried out using the commercial finite element code ABAQU...

Aadenoidectomy efficacy on the extrusion of tympanostomy tube

Aluminum extrusion with a deformable die

In aluminum extrusion, a work-piece (billet) is pressed through a die with an opening that closely resembles the desired shape of a profile. By this process, long profiles with an enormous variety of cross-sections can be produced to serve different markets such as building, construction and transport industry. When the shape of a profile does not conform to the specifications defined by the cu...