Extraction of Aspect-Independent Parameters Using Spectrogram Method for Chipless Frequency-Coded RFID

نویسندگان

چکیده

In this paper, a novel method for the extraction of aspect-independent parameters (that are analogous to complex natural resonances) chipless radio frequency (RF) identification (RFID) tags is presented. This based on short-time Fourier transform (STFT). The concept proved by utilizing classical depolarizing tags. Owing proposed spectrogram approach, reading success rate RFID tag improved accurate (ID) quality factors. With single measurement (i.e., without empty measurement) in practical environment, performance characterized: 1) at various misalignments reader and tag. 2) distances mounted numerous objects. 3) displacements within 3D zone interrogation. technique computationally fast due inherent nature (FFT) STFT.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Compact Printable Orientation Independent Chipless Rfid Tag

A novel design concept of a compact printable orientation independent chipless RFID tag is presented. The tag consists of a circular patch loaded with multiple slot ring resonators. This symmetric frequency domain based tag has the advantage to be read from any orientation with the reader antennas. The tag can be read in close proximity by chipless RFID tag reader with waveguide(s) and also can...

متن کامل

Time-domain Measurement of Time-coded Uwb Chipless Rfid Tags

Chipless ultra-wideband (UWB) has been proposed as a low-cost alternative for radiofrequency identification (RFID). In this paper, a comprehensible theoretical introduction to time-domain operation of a UWB RFID tag is described, and a circuit model is proposed. For commercial applications low-cost RFID readers are demanded. To this end, this paper addresses the measurement of time-coded UWB ch...

متن کامل

Directly Printable Frequency Signatured Chipless RFID Tag for IoT Applications

This paper proposes a low-cost, compact, flexible passive chipless RFID tag that has been designed and analyzed. The tag is a bowtie-shaped resonator based structure with 36 slots; where each patch is loaded with 18 slots. The tag is set in a way that each slot in a patch corresponds to a metal gap in the other patch. Hence there is no mutual interference, and high data capacity of 36 bits is a...

متن کامل

Chipless Rfid Tags

a compact multi resonator circuit for Chipless rfid tag is presented in this paper. The basic resonator is a shorted λ/4 Stepped Impedance Resonator (SIR). The tag is designed and simulated using High Frequency Structure Simulator and a 6 bit prototype is fabricated on rtduroid(εr=2.2 and tanδ=.0008) Substrate in area of 4.5x2cm2. Data is coded as amplitude variations in the frequency domain. H...

متن کامل

Chipless RFID, an emerging technology

Radiofrequency identification (RFID) is an established technique for automatic data captures exploiting reflected electromagnetic waves by scatters, usually called tags or transponders. In the last decades, roughly since the mid-1960s, very effective integrated circuit-based tags have been developed and implemented in numerous applications from the most simple like the electronic surveillance a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IEEE Sensors Journal

سال: 2021

ISSN: ['1558-1748', '1530-437X']

DOI: https://doi.org/10.1109/jsen.2020.3041574