Exploring the Effects of DEE Pilot Injection on a Biogas-Fueled HCCI Engine at Different Injection Locations

نویسندگان

چکیده

One of the popular ways to minimise impact emissions produced by engines is enabling alternative fuels. Out many trending options for fuels, biogas provides some unique advantages, such as being considered be environmentally friendly, obeying laws renewable energy and generating smallest carbon footprints. The two major drawbacks traditional diesel are their high rate NOx significant amount soot. best candidates overcoming these issues HCCI engines; can provide better control over generation overall thermal efficiency improved a greater level. These types compatible with both SI CI. Now, understand analyse behaviour HCCI, present work was focused on modified single-cylinder CI engine. It made operate in mode combination biogas, along diethyl ether (DEE), fuel mixture. To achieve combustion, combined air, while DEE acted an ignition source, which introduced at three different locations. In total, experiment performed sixty times so injection position. obtain this information, other parameters, flow rate, torque, methane fraction position, were also incorporated. main results consolidated warping output parameters brake efficiency, equivalence ratio, air–fuel brake-specific consumption. Emission CO, HC, NOx, smoke taken into account. indicate that port higher than manifold injections, lower observed injections.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental investigation of the effects of different injection parameters on a direct injection HCCI engine fueled with alcohol–gasoline fuel blends

Abbreviations: aBDC, after bottomdead center; aTDC, aft bottomdead center; bTDC, before top dead center; CA50, cra fraction reaches to 50%; CI, compression ignition; COVime indicated mean effective pressure; DI, direct injection; DIS DOI, duration of injection (first DOI1, second DOI2); EGR, homogenous charge compression ignition; IMEP, indicat injection ratio; MPRR, maximum pressure rise rate;...

متن کامل

Effects of second injection timing on combustion characteristics of a two stage direct injection gasoline–alcohol HCCI engine

In this study, the effect of second injection timing on the combustion and emissions characteristics of a direct injection HCCI gasoline engine was investigated by using ethanol and methanol blended gasoline fuel. For this aim, a diesel engine was converted to an electronically controlled HCCI gasoline engine. The injection timings and fuel quantity for each injection were adjusted to get desir...

متن کامل

Effects of Air Fuel Ratio and Injection Timing on Performance for Four-Cylinder Direct Injection Hydrogen Fueled Engine

In this study, the influence air fuel ratio and injection timing on the engine performance of 4-cylinder direct injection hydrogen fueled engine was investigated. The effect of air fuel ratio (AFR) and engine speed on optimum injection timing is presented. The 4-cylinder direct injection hydrogen engine model was developed utilizing the GTPower commercial software. This model employed one dimen...

متن کامل

Influence of Engine Speed and Injection Timings on In-cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine

The overall heat transfer process within the in-cylinder for port injection hydrogen fueled internal combustion engine (H2ICE) has been investigated through simulation, while the experimental data has been utilized for validation purpose of the adopted numerical model. One-dimensional gas dynamics was used to describe the flow and heat transfer in the components of the engine model. The engine ...

متن کامل

Trends of Air Fuel Ratio on Engine Performance of Four Cylinder Direct Injection Hydrogen Fueled Engine

The present study focuses on the effect of air-fuel ratio on the performance of four cylinder hydrogen fueled direct injection internal combustion engine. GT-Power was utilized to develop the model for direct injection engine. Air-fuel ratio was varied from rich limit to a lean limit. The rotational speed of the engine was varied from 1250 to 4500 rpm. The acquired results shown that the air fu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Sustainability

سال: 2023

ISSN: ['2071-1050']

DOI: https://doi.org/10.3390/su151310713