Explication for Femtosecond-Laser-Induced Nanostrucuring on Glass Surface
نویسندگان
چکیده
منابع مشابه
Femtosecond laser induced surface nanostructures on copper
This study demonstrated circular surface nanostructures and femtosecond laser-induced periodic surface structures (FLIPSS) for copper produced by a Ti:Sapphire femtosecond laser beam of wavelength 800 nm and duration 120 fs. The circular textured nanostrucres could be created by a single laser pulse. The nanostructures in the center of the heated spot diminish as laser fluence increases and a c...
متن کاملFemtosecond-laser Nanostructuring in Glass
We demonstrate the polarization-dependent anisotropy of the laser induced nanostructures inside SiO2 and GeO2 glass. Such nanostructures show form birefringence which is controllable by the femtosecond double-pulse configuration. In the case of SiO2 glass, we have also demonstrate polarization imaging filter based on the linear dichroism for the visible light ranging from 400 to 800 nm. While, ...
متن کاملFemtosecond laser-induced surface structures on carbon fibers.
The influence of different polarization states during the generation of periodic nanostructures on the surface of carbon fibers was investigated using a femtosecond laser with a pulse duration τ=300 fs, a wavelength λ=1025 nm, and a peak fluence F=4 J/cm². It was shown that linear polarization results in a well-aligned periodic pattern with different orders of magnitude concerning their peri...
متن کاملFemtosecond laser-induced stress-free ultra- densification inside porous glass
Unusually high densification ⩽26% was obtained without lateral residual stresses within the laser beam waist inside porous glass during its multi-shot femtosecond laser irradiation, which may induce in the glass the related high refractive index change ~0.1. Corresponding laser irradiation regimes, resulting in such ultra-densification, decompaction and voids inside the glass, were revealed as ...
متن کاملFabrication of Microstructure Arrays on Photosensitive Glass by Femtosecond Laser
1 Graduate Institute of Opto-Mechatronics, National Chung Cheng University, No. 168, University Rd., Min-Hsiung, Chia-Yi 621, Taiwan 2 ITRI South, Industrial Technology Research Institute, No. 8, Gongyan Rd., Liujia District, Tainan 734, Taiwan 3 Department of Mechanical Engineering, National Chung Cheng University, No. 168, University Rd., Min-Hsiung, Chia-Yi 621, Taiwan 4 Department of Mechan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 2016
ISSN: 0912-0289,1882-675X
DOI: 10.2493/jjspe.82.443