Experiments on Fluid Friction of Rotating Disc with Blades
نویسندگان
چکیده
منابع مشابه
Simulation of Mist Film Cooling on Rotating Gas Turbine Blades
Film cooling technique has been successfully applied to gas turbine blades to prevent it from the hot flue gas. However, a continuous demand of increasing the turbine inlet temperature to raise the efficiency of the turbine requires continuous improvement in film cooling effectiveness. The concept of injecting mist (tiny water droplets) into the cooling fluid has been proven under laboratory co...
متن کاملSteady Thermal Stresses in a Thin Rotating Disc of Finitesimal Deformation with Mechanical Load
Seth’s transition theory is applied to the problems of thickness variation parameter in a thin rotating disc by finite deformation. Neither the yield criterion nor the associated flow rule is assumed here. The results obtained here are applicable to compressible materials. If the additional condition of incompressibility is imposed, then the expression for stresses corresponds to those arising ...
متن کاملFrictional torque on a rotating disc
Resistance to motion often includes a dry frictional term independent of the speed of an object and a fluid drag term varying linearly with speed in the viscous limit. (At higher speeds, quadratic drag can also occur.) Here, measurements are performed for an aluminium disc mounted on bearings that is given an initial twist and allowed to spin until it comes to a stop. It is found that a sum of ...
متن کاملVacuum friction in rotating particles.
We study the frictional torque acting on particles rotating in empty space. At zero temperature, vacuum friction transforms mechanical energy into light emission and produces particle heating. However, particle cooling relative to the environment occurs at finite temperatures and low rotation velocities. Radiation emission is boosted and its spectrum significantly departed from a hot-body emiss...
متن کاملNumerical modelling and analysis of friction contact for turbine blades
High cycle fatigue failure of turbine and compressor blades due to resonance in the operating frequency range is one of the main problems in the design of gas turbine engines. To suppress excessive vibrations in the blades and prevent high cycle fatigue, dry friction dampers are used by the engine manufacturers. However, due to the nonlinear nature of friction contact, analysis of such systems ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1961
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.27.543