Experimental Validation of a Laser Heat Source Model for Laser Melting and Laser Cladding Processes

Experimental Validation of a Laser Heat Source Model for Laser Melting and Laser Cladding Processes

Selective laser melting (SLM) and laser cladding are laser additive manufacturing methods that have been developed for application to the near-net-shape process and 3D printing. The temperature distributions and track profiles of SLM and clad layers require additional in-depth investigation to optimize manufacturing processes. This research involved developing a tailored laser heat source model...

Experimental Studies of Model Drug Delivery Using Superpulse CO2 Laser

control of the optical properties of nanoparticles by laser fields

در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...

Numerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting

Microstructural changes during laser welding and laser surface treatment has been regarded by many researchers. Most researches have focused on studying the effect of various process parameters on the size and microstructure of the heat affected zone. But some studies show that the initial microstructure of the base metal can also affect the heat affected zone dimensions and final microstructur...

Laser-powder-material interactions in the laser cladding process

In this paper we present briefly two possible approaches for modelling the laser cladding process. The first approach is 2D and consists in finding the shape of the molten pool given the fraction of the laser power which is available at the surface of the workpiece and given the amount of powder sticking to the molten pool. The powder reaching the workpiece is assumed to melt instantaneously at...