Experimental Study on Water-Jet Shock Microforming Process Using Different Incident Pressures
نویسندگان
چکیده
منابع مشابه
Experimental Study on Repetition Frequency of Drop/Jet Movement in Electro-Spraying of Deionized Water
The electro-spraying process can be regular and periodic, consisting of cyclical phases of initiation (meniscus, drop, and/or jet), pulsation, deformation and separation. This paper presents an experimental study on the repetition frequency of drop and/or jet ejection from the capillary end with various spraying modes during an electro-spraying process of deionized (DI) water. The influence of ...
متن کاملExperimental and Numerical Study of Jet Mixing from a Shock-Containing Nozzle
The compressible jet plume emerging from a planar convergent–divergent nozzle containing a separation shock is investigated experimentally and numerically. The investigation encompasses exit-to-throat area ratios (Ae=At) from 1.0 to 1.8 and nozzle pressure ratios from 1.2 to 1.8. Experiments were conducted in a variable-geometry nozzle facility, and computations solved the Reynolds-averaged Nav...
متن کاملExperimental Study on the Surface Modification by Electrical Discharge Process
The creation of modified layer on metal surfaces using new methods is one of the procedures in surface engineering which can improve the surface mechanical properties. The electrical discharge process is a new method that can form a modified layer on the metal surfaces. This study aims to improve of pure aluminum surface properties through Electrical Discharge process with Monel 400 electrode. ...
متن کاملnumerical simulation of abrasive water jet cutting process using the sph and ale methods
on account of some complexities such as fluid-structure interaction and extra-large deformation problems, complete simulation of abrasive water jet cutting process is very hard. the main goal of this paper is to overcome these difficulties through comprehensive simulation in ls-dyna commercial software. for this purpose the smoothed particle hydrodynamics (sph) and arbitrary lagrangian eulerian...
متن کاملDevelopment of a Water-Jet Assisted Underwater Laser Cutting Process
We present the development of a new underwater laser cutting process in which a water-jet has been used along with the laser beam to remove the molten material through kerf. The conventional underwater laser cutting usually utilizes a high pressure gas jet along with laser beam to create a dry condition in the cutting zone and also to eject out the molten material. This causes a lot of gas bubb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2020
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2020/2365698